{"title":"Frames","description":"","products":[{"product_id":"volador-vx5-fpv-freestyle-t700-frame-kit","title":"Volador VX5 FPV Freestyle T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador series are specifically designed for FPV freestyle and cinematic. Available in two configurations: VX5 and VD5. Made with CNC aluminum alloy parts and high-quality T700 carbon.These frames have undergone countless design improvements and extensive testing to create ultra-crash resistant, which fit up for beginners and professional pilots.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador VX5 adopts Squashed X design for maximum control and precision, while Volador VD5 is the Deadcat style frame that lets you get props out of the view. 20x20mm and 30.5x30.5mm stack mounting holes, 20x20mm, 25x25mm VTX mounting makes this frame super convenient! The unique easy-swap arm design and tight-fitting structure design reduce the resonance to the minimum. The high-quality TPU parts adds up to the comfort of use and make the build look very neat and snug.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe power lead getting chewed up by propellers during flight. How many times has this happened to people because of improper mounting or crashes? That’s why we have integrated the XT60 connector on the rear of the Volador Frame to allow you to plug the battery easily and, most importantly, eliminate any chances of the cable damage by props or any sort of impact.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA very interesting a novel arm design has been implemented, where the arms are slightly thickened on the sides in the middle, where arms usually tend to break in hard crashes. This provides additional strength and rigidity, ultimately saving you spending additional funds on replacement parts in the long run.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador 5” is made of high-strength T700 carbon. The surface of the carbon plates is delicate and smooth, and every part of the frame is carefully chamfered to protect cables from scratches or even your palms and fingers during the building process.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnother interesting little detail of our frame is the unique anti-skid battery pad. We have found a way to make such a cool looking battery pad with our logo on it without increasing the overall cost and making it incredibly “sticky”.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe thought there’s another very important part of the quad that needs better protection. The FPV camera. And that’s why we are using aluminum alloy CNC camera plates. Aside from providing better protection for the camera, it looks very slick as well!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe’ve put huge effort into the TPU parts. They fit the frame fantastically, increase the overall frame durability, and again, look very slick! This is something we take a big pride in!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame comes with 12.9-level strength hardware with Loctite thread locker to make for more reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX5 Review:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/FNBHSzPeIoY\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/GvC5CjI0bAQ\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/v5WhagGr4WI\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh quality T700 carbon plate \u003cbr data-mce-fragment=\"1\"\u003e7075 aluminum alloy camera mounting plates for enhanced protection\u003cbr data-mce-fragment=\"1\"\u003eCleverly designed thickened arms\u003cbr data-mce-fragment=\"1\"\u003eThe integrated XT60 connector for safety and reliabililty\u003cbr data-mce-fragment=\"1\"\u003eHigh quality TPU parts\u003cbr data-mce-fragment=\"1\"\u003eUnique anti-slip battery pad\u003cbr data-mce-fragment=\"1\"\u003e12.9 strength hardware coated with Loctite\u003cbr data-mce-fragment=\"1\"\u003eCompatible with \u003ca title=\"dji o3 air unit\" href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\" target=\"_blank\"\u003eDJI O3 Air Unit\u003c\/a\u003e\/Caddx Vista\/\u003ca title=\"runcam-link-wasp-digital-hd-fpv-camera-system\" href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\" target=\"_blank\"\u003eRuncam link Wasp\u003c\/a\u003e\/\u003ca title=\"walksnail-avatar-digital-hd-vtx-micro-camera-kit\" href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\" target=\"_blank\"\u003eAvatar HD\u003c\/a\u003e, etc\u003cbr data-mce-fragment=\"1\"\u003e(Not compatible with DJI FPV Air Unit)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX5 Specifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eArm Thickness: 6mm\u003cbr data-mce-fragment=\"1\"\u003eTop plate thickness: 2.5mm\u003cbr data-mce-fragment=\"1\"\u003eMiddle plate thickness: 3mm\u003cbr data-mce-fragment=\"1\"\u003eBottom plate thickness: 3mm\u003cbr data-mce-fragment=\"1\"\u003ePropeller size: 5~5.1 inch\u003cbr data-mce-fragment=\"1\"\u003eMaterial: T700 carbon plate\u003cbr data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003cbr data-mce-fragment=\"1\"\u003eWeight: 199.5g(with TPU parts)\u003cbr data-mce-fragment=\"1\"\u003eColour: Black\/Tropical Mix (Optional)\u003cbr data-mce-fragment=\"1\"\u003eTotal Dimensions:177mm*165mm  Wheelbase:225mm\u003cbr data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditonal Suggested Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=2207\" target=\"_blank\"\u003eFlash 2207 FPV Motor\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=UFL\" target=\"_blank\"\u003eOsprey Antenna \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=5inch+propellers\" target=\"_blank\"\u003eHQ Props\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=Digital\" target=\"_blank\"\u003eDigital HD System\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/volador-gopro-9-10-11-tpu-adjustable-mount?variant=42027450794164\" target=\"_blank\"\u003eTPU Gopro Mount\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/battery-straps\/products\/flyfishrc-lipo-battery-strap\" target=\"_blank\"\u003eBattery strap\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX5-FPV-Freestyle-Frame-Kit-7_c3258e80-ca64-46e2-ad98-516533a26020.jpg?v=1668068333\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX5-FPV-Freestyle-Frame-Kit-8.jpg?v=1668067436\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX5-FPV-Freestyle-Frame-Kit-8.jpg?v=1668067436\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX5-FPV-Freestyle-Frame-Kit-9_da987857-44a6-4377-8851-50963428ebd1.jpg?v=1669198932\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX5-FPV-Freestyle-Frame-Kit-9_da987857-44a6-4377-8851-50963428ebd1.jpg?v=1669198932\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":42027508891828,"sku":"F000251","price":64.9,"currency_code":"USD","in_stock":false},{"title":"Tropical mix","offer_id":42027508924596,"sku":"F000241","price":69.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-VX5-FPV-Freestyle-Frame-Kit-2.jpg?v=1668066967"},{"product_id":"volador-vd5-deadcat-fpv-lr-t700-frame-kit","title":"Volador VD5 Deadcat FPV LR T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador series are specifically designed for FPV freestyle and cinematic. Available in two configurations: VX5 and VD5. Made with CNC aluminum alloy parts and high-quality T700 carbon.These frames have undergone countless design improvements and extensive testing to create ultra-crash resistant, which fit up for beginners and professional pilots.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador VX5 adopts Squashed X design for maximum control and precision, while Volador VD5 is the Deadcat style frame that lets you get props out of the view. 20x20mm and 30.5x30.5mm stack mounting holes, 20x20mm, 25x25mm VTX mounting makes this frame super convenient! The unique easy-swap arm design and tight-fitting structure design reduce the resonance to the minimum. The high-quality TPU parts adds up to the comfort of use and make the build look very neat and snug.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe power lead getting chewed up by propellers during flight. How many times has this happened to people because of improper mounting or crashes? That’s why we have integrated the XT60 connector on the rear of the Volador Frame to allow you to plug the battery easily and, most importantly, eliminate any chances of the cable damage by props or any sort of impact.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA very interesting a novel arm design has been implemented, where the arms are slightly thickened on the sides in the middle, where arms usually tend to break in hard crashes. This provides additional strength and rigidity, ultimately saving you spending additional funds on replacement parts in the long run.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador 5” is made of high-strength T700 carbon. The surface of the carbon plates is delicate and smooth, and every part of the frame is carefully chamfered to protect cables from scratches or even your palms and fingers during the building process.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnother interesting little detail of our frame is the unique anti-skid battery pad. We have found a way to make such a cool looking battery pad with our logo on it without increasing the overall cost and making it incredibly “sticky”.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe thought there’s another very important part of the quad that needs better protection. The FPV camera. And that’s why we are using aluminum alloy CNC camera plates. Aside from providing better protection for the camera, it looks very slick as well!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe’ve put huge effort into the TPU parts. They fit the frame fantastically, increase the overall frame durability, and again, look very slick! This is something we take a big pride in!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame comes with 12.9-level strength hardware with Loctite thread locker to make for more reliability.\u003c\/p\u003e\n\u003ch4\u003eReview：\u003c\/h4\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ka_4h5Y4DwA\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/0W1YgVDh6lY\" title=\"YouTube video player\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/v5WhagGr4WI\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh quality T700 carbon plate \u003cbr data-mce-fragment=\"1\"\u003e7075 aluminum alloy camera mounting plates for enhanced protection\u003cbr data-mce-fragment=\"1\"\u003eCleverly designed thickened arms\u003cbr data-mce-fragment=\"1\"\u003eThe integrated XT60 connector for safety and reliabililty\u003cbr data-mce-fragment=\"1\"\u003eHigh quality TPU parts\u003cbr data-mce-fragment=\"1\"\u003eUnique anti-slip battery pad\u003cbr data-mce-fragment=\"1\"\u003e12.9 strength hardware coated with Loctite\u003cbr data-mce-fragment=\"1\"\u003eCompatible with \u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\" title=\"dji o3 air unit\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\"\u003eDJI O3 Air Unit\u003c\/a\u003e\/Caddx Vista\/\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\" title=\"runcam-link-wasp-digital-hd-fpv-camera-system\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\"\u003eRuncam link Wasp\u003c\/a\u003e\/\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\" title=\"walksnail-avatar-digital-hd-vtx-micro-camera-kit\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\"\u003eAvatar HD\u003c\/a\u003e, etc\u003cbr data-mce-fragment=\"1\"\u003e(Not compatible with DJI FPV Air Unit)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVD5 Specifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eArm Thickness: 6mm\u003cbr data-mce-fragment=\"1\"\u003eTop plate thickness:2.5mm\u003cbr data-mce-fragment=\"1\"\u003eMiddle plate thickness:3mm\u003cbr data-mce-fragment=\"1\"\u003eBottom plate thickness：3mm\u003cbr data-mce-fragment=\"1\"\u003ePropeller size: 5~5.1 inch\u003cbr data-mce-fragment=\"1\"\u003eMaterial: T700 carbon plate\u003cbr data-mce-fragment=\"1\"\u003eFPV cam spacing:19mm\/20mm\u003cbr data-mce-fragment=\"1\"\u003eWeight: 205.3g(with TPU parts)\u003cbr data-mce-fragment=\"1\"\u003eTotal Dimensions:190mm*136mm  \u003cbr data-mce-fragment=\"1\"\u003eWheelbase:225mm\u003cbr data-mce-fragment=\"1\"\u003eStack mounting holes:20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr data-mce-fragment=\"1\"\u003eVTX mounting holes:20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditonal Suggested Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=2207\" target=\"_blank\"\u003eFlash 2207 FPV Motor\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=UFL\" target=\"_blank\"\u003eOsprey Antenna \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=5inch+propellers\" target=\"_blank\"\u003eHQ Props\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=Digital\" target=\"_blank\"\u003eDigital HD System\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/volador-gopro-9-10-11-tpu-adjustable-mount?variant=42027450794164\" target=\"_blank\"\u003eTPU Gopro Mount\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/battery-straps\/products\/flyfishrc-lipo-battery-strap\" target=\"_blank\"\u003eBattery strap\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD5-Deadcat-FPV-Frame-Kit-1.jpg?v=1668138835\" alt=\"\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD5-Deadcat-FPV-Frame-Kit-2.jpg?v=1668138880\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD5-Deadcat-FPV-Frame-Kit-2.jpg?v=1668138880\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD5-Deadcat-FPV-Frame-Kit-3_67b9cf35-8f5a-45d4-bf42-403754fe5de0.jpg?v=1668832571\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD5-Deadcat-FPV-Frame-Kit-3_67b9cf35-8f5a-45d4-bf42-403754fe5de0.jpg?v=1668832571\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":42027006263476,"sku":"F000250","price":64.9,"currency_code":"USD","in_stock":false},{"title":"Tropical Mix","offer_id":42027006296244,"sku":"F000242","price":69.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-VD5-Deadcat-FPV-Frame-Kit-7_654dc0ad-ac42-4ce8-891d-9ff38bb25d48.jpg?v=1668158926"},{"product_id":"volador-vd6-deadcat-fpv-lr-t700-frame-kit","title":"Volador VD6 Deadcat FPV LR T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador series are specifically designed for FPV freestyle and cinematic. Available in two configurations: VX6 and VD6. Made with CNC aluminum alloy parts and high-quality T700 carbon.These frames have undergone countless design improvements and extensive testing to create ultra-crash resistant, which fit up for beginners and professional pilots.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador VD6 adopts Squashed X design for maximum control and precision, while Volador VD6 is the Deadcat style frame that lets you get props out of the view. 20x20mm and 30.5x30.5mm stack mounting holes, 20x20mm, 25x25mm VTX mounting makes this frame super convenient! The unique easy-swap arm design and tight-fitting structure design reduce the resonance to the minimum. The high-quality TPU parts adds up to the comfort of use and make the build look very neat and snug.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe power lead getting chewed up by propellers during flight. How many times has this happened to people because of improper mounting or crashes? That’s why we have integrated the XT60 connector on the rear of the Volador Frame to allow you to plug the battery easily and, most importantly, eliminate any chances of the cable damage by props or any sort of impact.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA very interesting a novel arm design has been implemented, where the arms are slightly thickened on the sides in the middle, where arms usually tend to break in hard crashes. This provides additional strength and rigidity, ultimately saving you spending additional funds on replacement parts in the long run.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador 6” is made of high-strength T700 carbon. The surface of the carbon plates is delicate and smooth, and every part of the frame is carefully chamfered to protect cables from scratches or even your palms and fingers during the building process.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnother interesting little detail of our frame is the unique anti-skid battery pad. We have found a way to make such a cool looking battery pad with our logo on it without increasing the overall cost and making it incredibly “sticky”.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe thought there’s another very important part of the quad that needs better protection. The FPV camera. And that’s why we are using aluminum alloy CNC camera plates. Aside from providing better protection for the camera, it looks very slick as well!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe’ve put huge effort into the TPU parts. They fit the frame fantastically, increase the overall frame durability, and again, look very slick! This is something we take a big pride in!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame comes with 12.9-level strength hardware with Loctite thread locker to make for more reliability.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/v5WhagGr4WI\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh quality T700 carbon plate \u003cbr data-mce-fragment=\"1\"\u003e7075 aluminum alloy camera mounting plates for enhanced protection\u003cbr data-mce-fragment=\"1\"\u003eCleverly designed thickened arms\u003cbr data-mce-fragment=\"1\"\u003eThe integrated XT60 connector for safety and reliabililty\u003cbr data-mce-fragment=\"1\"\u003eHigh quality TPU parts\u003cbr data-mce-fragment=\"1\"\u003eUnique anti-slip battery pad\u003cbr data-mce-fragment=\"1\"\u003e12.9 strength hardware coated with Loctite\u003cbr data-mce-fragment=\"1\"\u003eCompatible with \u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\" title=\"dji o3 air unit\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\"\u003eDJI O3 Air Unit\u003c\/a\u003e\/Caddx Vista\/\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\" title=\"runcam-link-wasp-digital-hd-fpv-camera-system\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\"\u003eRuncam link Wasp\u003c\/a\u003e\/\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\" title=\"walksnail-avatar-digital-hd-vtx-micro-camera-kit\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\"\u003eAvatar HD\u003c\/a\u003e, etc\u003cbr data-mce-fragment=\"1\"\u003e(Not compatible with DJI FPV Air Unit)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVD6 Specification：\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 3mm\u003cbr\u003eBottom plate thickness: 3mm\u003cbr\u003ePropeller size: 6~6.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 216.1g(with TPU parts)  Wheelbase: 260mm\u003cbr\u003eTotal Dimensions: 209mm*159mm  \u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditonal Suggested Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=UFL\" target=\"_blank\"\u003eOsprey Antenna \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=Digital\" target=\"_blank\"\u003eDigital HD System\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/volador-gopro-9-10-11-tpu-adjustable-mount?variant=42027450794164\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/volador-gopro-9-10-11-tpu-adjustable-mount?variant=42027450794164\" target=\"_blank\"\u003eTPU Gopro Mount\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/battery-straps\/products\/flyfishrc-lipo-battery-strap\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/battery-straps\/products\/flyfishrc-lipo-battery-strap\" target=\"_blank\"\u003eBattery strap\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD6-Deadcat-FPV-Frame-Kit-1.jpg?v=1668139197\" alt=\"\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD6-Deadcat-FPV-Frame-Kit-2.jpg?v=1668139203\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD6-Deadcat-FPV-Frame-Kit-2.jpg?v=1668139203\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD6-Deadcat-FPV-Frame-Kit-3_94bd0a3d-cbe9-48fa-8be2-556a3ab9a709.jpg?v=1668831350\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VD6-Deadcat-FPV-Frame-Kit-3_94bd0a3d-cbe9-48fa-8be2-556a3ab9a709.jpg?v=1668831350\"\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":42027046404276,"sku":"F000248","price":69.9,"currency_code":"USD","in_stock":false},{"title":"Tropical Mix","offer_id":42027046437044,"sku":"F000244","price":74.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-VD6-Deadcat-FPV-Frame-Kit-4.jpg?v=1668157654"},{"product_id":"volador-vx6-fpv-freestyle-t700-frame-kit","title":"Volador VX6 FPV Freestyle T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador series are specifically designed for FPV freestyle and cinematic. Available in two configurations: VX6 and VD6. Made with CNC aluminum alloy parts and high-quality T700 carbon.These frames have undergone countless design improvements and extensive testing to create ultra-crash resistant, which fit up for beginners and professional pilots.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador VX6 adopts Squashed X design for maximum control and precision, while Volador VD6 is the Deadcat style frame that lets you get props out of the view. 20x20mm and 30.5x30.5mm stack mounting holes, 20x20mm, 25x25mm VTX mounting makes this frame super convenient! The unique easy-swap arm design and tight-fitting structure design reduce the resonance to the minimum. The high-quality TPU parts adds up to the comfort of use and make the build look very neat and snug.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe power lead getting chewed up by propellers during flight. How many times has this happened to people because of improper mounting or crashes? That’s why we have integrated the XT60 connector on the rear of the Volador Frame to allow you to plug the battery easily and, most importantly, eliminate any chances of the cable damage by props or any sort of impact.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eA very interesting a novel arm design has been implemented, where the arms are slightly thickened on the sides in the middle, where arms usually tend to break in hard crashes. This provides additional strength and rigidity, ultimately saving you spending additional funds on replacement parts in the long run.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eVolador 6” is made of high-strength T700 carbon. The surface of the carbon plates is delicate and smooth, and every part of the frame is carefully chamfered to protect cables from scratches or even your palms and fingers during the building process.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnother interesting little detail of our frame is the unique anti-skid battery pad. We have found a way to make such a cool looking battery pad with our logo on it without increasing the overall cost and making it incredibly “sticky”.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe thought there’s another very important part of the quad that needs better protection. The FPV camera. And that’s why we are using aluminum alloy CNC camera plates. Aside from providing better protection for the camera, it looks very slick as well!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe’ve put huge effort into the TPU parts. They fit the frame fantastically, increase the overall frame durability, and again, look very slick! This is something we take a big pride in!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame comes with 12.9-level strength hardware with Loctite thread locker to make for more reliability.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/v5WhagGr4WI\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh quality T700 carbon plate \u003cbr data-mce-fragment=\"1\"\u003e7075 aluminum alloy camera mounting plates for enhanced protection\u003cbr data-mce-fragment=\"1\"\u003eCleverly designed thickened arms\u003cbr data-mce-fragment=\"1\"\u003eThe integrated XT60 connector for safety and reliabililty\u003cbr data-mce-fragment=\"1\"\u003eHigh quality TPU parts\u003cbr data-mce-fragment=\"1\"\u003eUnique anti-slip battery pad\u003cbr data-mce-fragment=\"1\"\u003e12.9 strength hardware coated with Loctite\u003cbr data-mce-fragment=\"1\"\u003eCompatible with \u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\" title=\"dji o3 air unit\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/dji-o3-air-unit\"\u003eDJI O3 Air Unit\u003c\/a\u003e\/Caddx Vista\/\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\" title=\"runcam-link-wasp-digital-hd-fpv-camera-system\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/runcam-link-wasp-digital-hd-fpv-camera-system\"\u003eRuncam link Wasp\u003c\/a\u003e\/\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\" title=\"walksnail-avatar-digital-hd-vtx-micro-camera-kit\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/digital-hd-system\/products\/walksnail-avatar-digital-hd-vtx-micro-camera-kit\"\u003eAvatar HD\u003c\/a\u003e, etc\u003cbr data-mce-fragment=\"1\"\u003e(Not compatible with DJI FPV Air Unit)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX6 Specifications：\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 3mm\u003cbr\u003eBottom plate thickness: 3mm\u003cbr\u003ePropeller size: 6~6.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 211.1g(with TPU parts)\u003cbr\u003eTotal Dimensions: 209mm*159mm   Wheelbase: 268mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditonal Suggested Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=UFL\" target=\"_blank\"\u003eOsprey Antenna \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/search?options%5Bprefix%5D=last\u0026amp;q=Digital\" target=\"_blank\"\u003eDigital HD System\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/volador-gopro-9-10-11-tpu-adjustable-mount?variant=42027450794164\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/volador-gopro-9-10-11-tpu-adjustable-mount?variant=42027450794164\" data-mce-fragment=\"1\"\u003eTPU Gopro Mount\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/battery-straps\/products\/flyfishrc-lipo-battery-strap\" target=\"_blank\" data-mce-href=\"https:\/\/www.flyfish-rc.com\/collections\/battery-straps\/products\/flyfishrc-lipo-battery-strap\" data-mce-fragment=\"1\"\u003eBattery strap\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX6-FPV-Freestyle-Frame-Kit-1.jpg?v=1668140229\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX6-FPV-Freestyle-Frame-Kit-1.jpg?v=1668140229\" data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX6-FPV-Freestyle-Frame-Kit-2.jpg?v=1668140235\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX6-FPV-Freestyle-Frame-Kit-2.jpg?v=1668140235\" data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-VX6-FPV-Freestyle-Frame-Kit-3_9dcb121d-91cc-446f-87d3-71897165e90f.jpg?v=1669198867\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":42027053056180,"sku":"F000249","price":69.9,"currency_code":"USD","in_stock":false},{"title":"Tropical Mix","offer_id":42027053088948,"sku":"F000243","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-VX6-FPV-Freestyle-Frame-Kit-10.jpg?v=1668159040"},{"product_id":"volador-ii-vx5-o3-fpv-freestyle-t700-frame-kit","title":"Volador II VX5 O3 FPV Freestyle T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe are pleased to announce the second version of our 5” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O3 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003cbr data-mce-fragment=\"1\"\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolador II Assembly Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/30WRZztxFZs\" title=\"YouTube video player\" width=\"560\" height=\"315\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX5 Review by Wyatt：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/sxNTleQsJAY\" width=\"560\" height=\"315\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh-end T700 carbon fiber\u003cbr data-mce-fragment=\"1\"\u003eTight structure design minimizes resonance\u003cbr data-mce-fragment=\"1\"\u003eThe new CNC aluminum camera plates effectively protect the camera \u003cbr data-mce-fragment=\"1\"\u003eThe silicone shock-absorbers for the O3 AU eliminate jello\u003cbr data-mce-fragment=\"1\"\u003eIntegrated XT60 connector for safety and reliability\u003cbr data-mce-fragment=\"1\"\u003eHigh-quality TPU parts\u003cbr data-mce-fragment=\"1\"\u003eInnovative anti-slip battery pads\u003cbr data-mce-fragment=\"1\"\u003eNew motor wire protection tubes\u003cbr data-mce-fragment=\"1\"\u003eCompatible with both 19\/20mm cameras\u003cbr data-mce-fragment=\"1\"\u003eEquipped with all accessories needed for analog and HD builds\u003cbr data-mce-fragment=\"1\"\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr data-mce-fragment=\"1\"\u003eHigh electronics compatibility\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame is now significantly lighter.\u003cbr data-mce-fragment=\"1\"\u003eThe new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.\u003cbr data-mce-fragment=\"1\"\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003cbr data-mce-fragment=\"1\"\u003eAdded keystone to even further reduce arm vibration.\u003cbr data-mce-fragment=\"1\"\u003eAdded bottom screw gasket.\u003cbr data-mce-fragment=\"1\"\u003eAdded motor wire protection tubes.\u003cbr data-mce-fragment=\"1\"\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003cbr data-mce-fragment=\"1\"\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003cbr data-mce-fragment=\"1\"\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003cbr data-mce-fragment=\"1\"\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003cbr data-mce-fragment=\"1\"\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003cbr data-mce-fragment=\"1\"\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX5 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 5~5.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 177.4g(with TPU parts)\u003cbr\u003eColour: Black\/Tropical Mix\/Yellow (Optional)\u003cbr\u003eTotal Dimensions:177mm*165mm Wheelbase:225mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVX5\/VX6 II Manual Detail \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VX5-VX6_Manual.pdf\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VX5-VX6_Manual.pdf\"\u003e\u003cstrong\u003eClick\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-_-VX5-O3-Frame-Detail..jpg?v=1679995967\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-_-VX5-O3-Frame-Detail..jpg?v=1679995967\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FlyFish RC","offers":[{"title":"Black","offer_id":42215327170740,"sku":"F000421","price":59.9,"currency_code":"USD","in_stock":true},{"title":"Tropical Mix","offer_id":42215327203508,"sku":"F000417","price":69.9,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":43612504457396,"sku":"FF01640","price":59.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-_-VX5-O3-FPV-Freestyle-T700-Frame-Kit-1.jpg?v=1679307928"},{"product_id":"voladorⅱvd5-o3-deadcat-fpv-t700-frame-kit","title":"Volador II VD5 O3 Deadcat FPV T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWe are pleased to announce the second version of our 5” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O3 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolador II Assembly Guide:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/30WRZztxFZs\" width=\"560\" height=\"315\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh-end T700 carbon fiber\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eTight structure design minimizes resonance\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new CNC aluminum camera plates effectively protect the camera\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe silicone shock-absorbers for the O3 AU eliminate jello\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eIntegrated XT60 connector for safety and reliability\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh-quality TPU parts\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eInnovative anti-slip battery pads\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eNew motor wire protection tubes\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eCompatible with both 19\/20mm cameras\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eEquipped with all accessories needed for analog and HD builds\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh electronics compatibility\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame is now significantly lighter.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded keystone to even further reduce arm vibration.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded bottom screw gasket.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded motor wire protection tubes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eVD5 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 5~5.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 186.4g(with TPU parts)\u003cbr\u003eColour: Black\/Tropical Mix\/Yellow  (Optional)\u003cbr\u003eTotal Dimensions:190mm*136mm Wheelbase:225mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVD5\/VD6 II Manual Detail \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VD5-VD6_Manual.pdf\"\u003e\u003cstrong\u003eClick\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-_-VD5-O3-Frame-Detail.jpg?v=1679995967\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"FlyFish RC","offers":[{"title":"Black","offer_id":42215386448052,"sku":"F000423","price":59.9,"currency_code":"USD","in_stock":false},{"title":"Tropical Mix","offer_id":42215386480820,"sku":"F000419","price":69.9,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":43612515401908,"sku":"FF01641","price":59.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-_-VD5-O3-Deadcat-FPV-T700-Frame-Kit-3.jpg?v=1679315489"},{"product_id":"volador-ii-vx6-o3-fpv-freestyle-t700-frame-kit","title":"Volador II VX6 O3 FPV Freestyle T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWe are pleased to announce the second version of our 6” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O3 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolador II Assembly Guide:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/30WRZztxFZs\" width=\"560\" height=\"315\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh-end T700 carbon fiber\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eTight structure design minimizes resonance\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new CNC aluminum camera plates effectively protect the camera\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe silicone shock-absorbers for the O3 AU eliminate jello\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eIntegrated XT60 connector for safety and reliability\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh-quality TPU parts\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eInnovative anti-slip battery pads\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eNew motor wire protection tubes\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eCompatible with both 19\/20mm cameras\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eEquipped with all accessories needed for analog and HD builds\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh electronics compatibility\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame is now significantly lighter.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded keystone to even further reduce arm vibration.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded bottom screw gasket.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded motor wire protection tubes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eVX6 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 6~6.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 188.2g(with TPU parts)\u003cbr\u003eColour: Black\/Tropical Mix \/Yellow (Optional)\u003cbr\u003eTotal Dimensions:209mm*159mm Wheelbase:268mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVX5\/VX6 II Manual Detail \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VX5-VX6_Manual.pdf\"\u003e\u003cstrong\u003eClick\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"border-block: unset; border-inline: unset; border-start-start-radius: unset; border-start-end-radius: unset; border-end-start-radius: unset; border-end-end-radius: unset; overflow-inline: unset; overflow-block: unset; overscroll-behavior-inline: unset; overscroll-behavior-block: unset; margin-block: unset; margin-inline: unset; scroll-margin-block: unset; scroll-margin-inline: unset; padding-block: unset; padding-inline: unset; scroll-padding-block: unset; scroll-padding-inline: unset; inset-block: unset; inset-inline: unset; block-size: unset; min-block-size: unset; max-block-size: unset; inline-size: unset; min-inline-size: unset; max-inline-size: unset; contain-intrinsic-block-size: unset; contain-intrinsic-inline-size: unset; background: unset; background-blend-mode: unset; border: unset; border-radius: unset; box-decoration-break: unset; -moz-float-edge: unset; display: unset; position: fixed; float: unset; clear: unset; vertical-align: unset; overflow: unset; overflow-anchor: unset; transform: unset; rotate: unset; scale: unset; translate: unset; offset: unset; scroll-behavior: unset; scroll-snap-align: unset; scroll-snap-type: unset; scroll-snap-stop: unset; overscroll-behavior: unset; isolation: unset; break-after: unset; break-before: unset; break-inside: unset; resize: unset; perspective: unset; perspective-origin: unset; backface-visibility: unset; transform-box: unset; transform-style: unset; transform-origin: unset; contain: unset; container: unset; appearance: unset; -moz-orient: unset; will-change: unset; shape-image-threshold: unset; shape-margin: unset; shape-outside: unset; touch-action: unset; -webkit-line-clamp: unset; scrollbar-gutter: unset; columns: unset; column-fill: unset; column-rule: unset; column-span: unset; content: unset; counter-increment: unset; counter-reset: unset; counter-set: unset; opacity: unset; box-shadow: unset; clip: rect(0px, 0px, 0px, 0px); filter: unset; backdrop-filter: unset; mix-blend-mode: unset; font: unset; font-synthesis: unset; font-palette: unset; visibility: unset; writing-mode: unset; text-orientation: unset; print-color-adjust: unset; image-rendering: unset; image-orientation: unset; dominant-baseline: unset; text-anchor: unset; color-interpolation: unset; color-interpolation-filters: unset; fill: unset; fill-opacity: unset; fill-rule: unset; shape-rendering: unset; stroke: unset; stroke-width: unset; stroke-linecap: unset; stroke-linejoin: unset; stroke-miterlimit: unset; stroke-opacity: unset; stroke-dasharray: unset; stroke-dashoffset: unset; clip-rule: unset; marker: unset; paint-order: unset; border-collapse: unset; empty-cells: unset; caption-side: unset; border-spacing: unset; color: unset; text-transform: unset; hyphens: unset; -moz-text-size-adjust: unset; text-indent: unset; overflow-wrap: unset; word-break: unset; text-justify: unset; text-align-last: unset; text-align: unset; letter-spacing: unset; word-spacing: unset; white-space: pre; text-shadow: unset; text-emphasis: unset; text-emphasis-position: unset; tab-size: unset; line-break: unset; -webkit-text-fill-color: unset; -webkit-text-stroke: unset; ruby-align: unset; ruby-position: unset; text-combine-upright: unset; text-rendering: unset; text-underline-offset: unset; text-underline-position: unset; text-decoration-skip-ink: unset; hyphenate-character: unset; forced-color-adjust: unset; cursor: unset; pointer-events: unset; -moz-user-input: unset; -moz-user-modify: unset; -moz-user-focus: unset; caret-color: unset; accent-color: unset; color-scheme: unset; scrollbar-color: unset; list-style: unset; quotes: unset; margin: unset; overflow-clip-margin: unset; scroll-margin: unset; outline: unset; outline-offset: unset; page: unset; padding: unset; scroll-padding: unset; top: 0px; right: unset; bottom: unset; left: unset; z-index: unset; flex-flow: unset; place-content: unset; place-items: unset; flex: unset; place-self: unset; order: unset; width: unset; min-width: unset; max-width: unset; height: unset; min-height: unset; max-height: unset; box-sizing: unset; object-fit: unset; object-position: unset; grid-area: unset; grid: unset; gap: unset; aspect-ratio: unset; contain-intrinsic-size: unset; vector-effect: unset; stop-color: unset; stop-opacity: unset; flood-color: unset; flood-opacity: unset; lighting-color: unset; mask-type: unset; clip-path: unset; mask: unset; x: unset; y: unset; cx: unset; cy: unset; rx: unset; ry: unset; r: unset; d: unset; table-layout: unset; text-overflow: unset; text-decoration: unset; ime-mode: unset; scrollbar-width: unset; user-select: text; -moz-window-dragging: unset; -moz-force-broken-image-icon: unset; transition: unset; animation: unset; -moz-box-align: unset; -moz-box-direction: unset; -moz-box-flex: unset; -moz-box-orient: unset; -moz-box-pack: unset; -moz-box-ordinal-group: unset;\"\u003ehttps:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VX5-VX6_Manual.pdf?v=1685343572\u003c\/span\u003e\u003cspan style=\"border-block: unset; border-inline: unset; border-start-start-radius: unset; border-start-end-radius: unset; border-end-start-radius: unset; border-end-end-radius: unset; overflow-inline: unset; overflow-block: unset; overscroll-behavior-inline: unset; overscroll-behavior-block: unset; margin-block: unset; margin-inline: unset; scroll-margin-block: unset; scroll-margin-inline: unset; padding-block: unset; padding-inline: unset; scroll-padding-block: unset; scroll-padding-inline: unset; inset-block: unset; inset-inline: unset; block-size: unset; min-block-size: unset; max-block-size: unset; inline-size: unset; min-inline-size: unset; max-inline-size: unset; contain-intrinsic-block-size: unset; contain-intrinsic-inline-size: unset; background: unset; background-blend-mode: unset; border: unset; border-radius: unset; box-decoration-break: unset; -moz-float-edge: unset; display: unset; position: fixed; float: unset; clear: unset; vertical-align: unset; overflow: unset; overflow-anchor: unset; transform: unset; rotate: unset; scale: unset; translate: unset; offset: unset; scroll-behavior: unset; scroll-snap-align: unset; scroll-snap-type: unset; scroll-snap-stop: unset; overscroll-behavior: unset; isolation: unset; break-after: unset; break-before: unset; break-inside: unset; resize: unset; perspective: unset; perspective-origin: unset; backface-visibility: unset; transform-box: unset; transform-style: unset; transform-origin: unset; contain: unset; container: unset; appearance: unset; -moz-orient: unset; will-change: unset; shape-image-threshold: unset; shape-margin: unset; shape-outside: unset; touch-action: unset; -webkit-line-clamp: unset; scrollbar-gutter: unset; columns: unset; column-fill: unset; column-rule: unset; column-span: unset; content: unset; counter-increment: unset; counter-reset: unset; counter-set: unset; opacity: unset; box-shadow: unset; clip: rect(0px, 0px, 0px, 0px); filter: unset; backdrop-filter: unset; mix-blend-mode: unset; font: unset; font-synthesis: unset; font-palette: unset; visibility: unset; writing-mode: unset; text-orientation: unset; print-color-adjust: unset; image-rendering: unset; image-orientation: unset; dominant-baseline: unset; text-anchor: unset; color-interpolation: unset; color-interpolation-filters: unset; fill: unset; fill-opacity: unset; fill-rule: unset; shape-rendering: unset; stroke: unset; stroke-width: unset; stroke-linecap: unset; stroke-linejoin: unset; stroke-miterlimit: unset; stroke-opacity: unset; stroke-dasharray: unset; stroke-dashoffset: unset; clip-rule: unset; marker: unset; paint-order: unset; border-collapse: unset; empty-cells: unset; caption-side: unset; border-spacing: unset; color: unset; text-transform: unset; hyphens: unset; -moz-text-size-adjust: unset; text-indent: unset; overflow-wrap: unset; word-break: unset; text-justify: unset; text-align-last: unset; text-align: unset; letter-spacing: unset; word-spacing: unset; white-space: pre; text-shadow: unset; text-emphasis: unset; text-emphasis-position: unset; tab-size: unset; line-break: unset; -webkit-text-fill-color: unset; -webkit-text-stroke: unset; ruby-align: unset; ruby-position: unset; text-combine-upright: unset; text-rendering: unset; text-underline-offset: unset; text-underline-position: unset; text-decoration-skip-ink: unset; hyphenate-character: unset; forced-color-adjust: unset; cursor: unset; pointer-events: unset; -moz-user-input: unset; -moz-user-modify: unset; -moz-user-focus: unset; caret-color: unset; accent-color: unset; color-scheme: unset; scrollbar-color: unset; list-style: unset; quotes: unset; margin: unset; overflow-clip-margin: unset; scroll-margin: unset; outline: unset; outline-offset: unset; page: unset; padding: unset; scroll-padding: unset; top: 0px; right: unset; bottom: unset; left: unset; z-index: unset; flex-flow: unset; place-content: unset; place-items: unset; flex: unset; place-self: unset; order: unset; width: unset; min-width: unset; max-width: unset; height: unset; min-height: unset; max-height: unset; box-sizing: unset; object-fit: unset; object-position: unset; grid-area: unset; grid: unset; gap: unset; aspect-ratio: unset; contain-intrinsic-size: unset; vector-effect: unset; stop-color: unset; stop-opacity: unset; flood-color: unset; flood-opacity: unset; lighting-color: unset; mask-type: unset; clip-path: unset; mask: unset; x: unset; y: unset; cx: unset; cy: unset; rx: unset; ry: unset; r: unset; d: unset; table-layout: unset; text-overflow: unset; text-decoration: unset; ime-mode: unset; scrollbar-width: unset; user-select: text; -moz-window-dragging: unset; -moz-force-broken-image-icon: unset; transition: unset; animation: unset; -moz-box-align: unset; -moz-box-direction: unset; -moz-box-flex: unset; -moz-box-orient: unset; -moz-box-pack: unset; -moz-box-ordinal-group: unset;\" data-mce-fragment=\"1\" data-mce-style=\"border-block: unset; border-inline: unset; border-start-start-radius: unset; border-start-end-radius: unset; border-end-start-radius: unset; border-end-end-radius: unset; overflow-inline: unset; overflow-block: unset; overscroll-behavior-inline: unset; overscroll-behavior-block: unset; margin-block: unset; margin-inline: unset; scroll-margin-block: unset; scroll-margin-inline: unset; padding-block: unset; padding-inline: unset; scroll-padding-block: unset; scroll-padding-inline: unset; inset-block: unset; inset-inline: unset; block-size: unset; min-block-size: unset; max-block-size: unset; inline-size: unset; min-inline-size: unset; max-inline-size: unset; contain-intrinsic-block-size: unset; contain-intrinsic-inline-size: unset; background: unset; background-blend-mode: unset; border: unset; border-radius: unset; box-decoration-break: unset; -moz-float-edge: unset; display: unset; position: fixed; float: unset; clear: unset; vertical-align: unset; overflow: unset; overflow-anchor: unset; transform: unset; rotate: unset; scale: unset; translate: unset; offset: unset; scroll-behavior: unset; scroll-snap-align: unset; scroll-snap-type: unset; scroll-snap-stop: unset; overscroll-behavior: unset; isolation: unset; break-after: unset; break-before: unset; break-inside: unset; resize: unset; perspective: unset; perspective-origin: unset; backface-visibility: unset; transform-box: unset; transform-style: unset; transform-origin: unset; contain: unset; container: unset; appearance: unset; -moz-orient: unset; will-change: unset; shape-image-threshold: unset; shape-margin: unset; shape-outside: unset; touch-action: unset; -webkit-line-clamp: unset; scrollbar-gutter: unset; columns: unset; column-fill: unset; column-rule: unset; column-span: unset; content: unset; counter-increment: unset; counter-reset: unset; counter-set: unset; opacity: unset; box-shadow: unset; clip: rect(0px, 0px, 0px, 0px); filter: unset; backdrop-filter: unset; mix-blend-mode: unset; font: unset; font-synthesis: unset; font-palette: unset; visibility: unset; writing-mode: unset; text-orientation: unset; print-color-adjust: unset; image-rendering: unset; image-orientation: unset; dominant-baseline: unset; text-anchor: unset; color-interpolation: unset; color-interpolation-filters: unset; fill: unset; fill-opacity: unset; fill-rule: unset; shape-rendering: unset; stroke: unset; stroke-width: unset; stroke-linecap: unset; stroke-linejoin: unset; stroke-miterlimit: unset; stroke-opacity: unset; stroke-dasharray: unset; stroke-dashoffset: unset; clip-rule: unset; marker: unset; paint-order: unset; border-collapse: unset; empty-cells: unset; caption-side: unset; border-spacing: unset; color: unset; text-transform: unset; hyphens: unset; -moz-text-size-adjust: unset; text-indent: unset; overflow-wrap: unset; word-break: unset; text-justify: unset; text-align-last: unset; text-align: unset; letter-spacing: unset; word-spacing: unset; white-space: pre; text-shadow: unset; text-emphasis: unset; text-emphasis-position: unset; tab-size: unset; line-break: unset; -webkit-text-fill-color: unset; -webkit-text-stroke: unset; ruby-align: unset; ruby-position: unset; text-combine-upright: unset; text-rendering: unset; text-underline-offset: unset; text-underline-position: unset; text-decoration-skip-ink: unset; hyphenate-character: unset; forced-color-adjust: unset; cursor: unset; pointer-events: unset; -moz-user-input: unset; -moz-user-modify: unset; -moz-user-focus: unset; caret-color: unset; accent-color: unset; color-scheme: unset; scrollbar-color: unset; list-style: unset; quotes: unset; margin: unset; overflow-clip-margin: unset; scroll-margin: unset; outline: unset; outline-offset: unset; page: unset; padding: unset; scroll-padding: unset; top: 0px; right: unset; bottom: unset; left: unset; z-index: unset; flex-flow: unset; place-content: unset; place-items: unset; flex: unset; place-self: unset; order: unset; width: unset; min-width: unset; max-width: unset; height: unset; min-height: unset; max-height: unset; box-sizing: unset; object-fit: unset; object-position: unset; grid-area: unset; grid: unset; gap: unset; aspect-ratio: unset; contain-intrinsic-size: unset; vector-effect: unset; stop-color: unset; stop-opacity: unset; flood-color: unset; flood-opacity: unset; lighting-color: unset; mask-type: unset; clip-path: unset; mask: unset; x: unset; y: unset; cx: unset; cy: unset; rx: unset; ry: unset; r: unset; d: unset; table-layout: unset; text-overflow: unset; text-decoration: unset; ime-mode: unset; scrollbar-width: unset; user-select: text; -moz-window-dragging: unset; -moz-force-broken-image-icon: unset; transition: unset; animation: unset; -moz-box-align: unset; -moz-box-direction: unset; -moz-box-flex: unset; -moz-box-orient: unset; -moz-box-pack: unset; -moz-box-ordinal-group: unset;\"\u003ehttps:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VX5-VX6_Manual.pdf?v=1685343572\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-_-VX6-O3-Frame-Detail..jpg?v=1679995967\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0618\/1811\/0132\/files\/Volador-_-VX6-O3-Frame-Detail..jpg?v=1679995967\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":42215396147380,"sku":"F000422","price":64.9,"currency_code":"USD","in_stock":true},{"title":"Tropical Mix","offer_id":42215396180148,"sku":"F000418","price":61.9,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":43612511305908,"sku":"FF01645","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-_-VX6-O3-FPV-Freestyle-T700-Frame-Kit-1.jpg?v=1679315821"},{"product_id":"voladorⅱvd6-o3-deadcat-fpv-t700-frame-kit","title":"Volador II VD6 O3 Deadcat FPV T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWe are pleased to announce the second version of our 6” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O3 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolador II Assembly Guide:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/30WRZztxFZs\" title=\"YouTube video player\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eReview:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/6CUyfn1Qe_I\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh-end T700 carbon fiber\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eTight structure design minimizes resonance\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new CNC aluminum camera plates effectively protect the camera\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe silicone shock-absorbers for the O3 AU eliminate jello\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eIntegrated XT60 connector for safety and reliability\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh-quality TPU parts\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eInnovative anti-slip battery pads\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eNew motor wire protection tubes\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eCompatible with both 19\/20mm cameras\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eEquipped with all accessories needed for analog and HD builds\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eHigh electronics compatibility\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe frame is now significantly lighter.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded keystone to even further reduce arm vibration.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded bottom screw gasket.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAdded motor wire protection tubes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eVD6 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 6~6.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 200g(with TPU parts)\u003cbr\u003eColour: Black\/Tropical Mix (Optional)\u003cbr\u003eTotal Dimensions:259mm*109mm Wheelbase:260mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVD5\/VD6 II Manual Detail \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VD5-VD6_Manual.pdf\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_II_VD5-VD6_Manual.pdf\"\u003e\u003cstrong\u003eClick\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0618\/1811\/0132\/files\/VD6.jpg?v=1679994141\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":42215405715636,"sku":"F000424","price":64.9,"currency_code":"USD","in_stock":true},{"title":"Tropical Mix","offer_id":42215405748404,"sku":"F000420","price":61.9,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":43612518056116,"sku":"FF01644","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/products\/Volador-_-VD6-O3-Deadcat-FPV-T700-Frame-Kit-2.jpg?v=1679316277"},{"product_id":"volador-vx3-3inch-vx3-5-3-5inch-o3-freestyle-frame-kit","title":"Volador VX3 VX3.5 O3 Freestyle Frame Kit","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eWe are pleased to announce the birth of our Volador VX3 and VX3.5 inch frames for FPV flying, these frames provide a 5-inch flying experience and are highly compatible and simple in their structural design. Necessary accessories are provided to make assembly easy, convenient, and organized.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame is designed with a Squashed X configuration, allowing for maximum control and compatibility with a range of analog and HD systems available in the market. The high-quality TPU components are cleverly designed to facilitate a more integrated and neat installation, ensuring that even pilots with a degree of OCD will be satisfied with the cleanest possible appearance.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe have also designed a silicone damping board plugin specifically for the installation of the DJI O3 Air Unit camera. This will eliminate any possible jello in the DVR and is also compatible with cameras in 19mm\/20mm format.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame is made of high-strength CNC aluminum alloy components and the highest quality T700 carbon fiber plates, with a super smooth surface and uniformly chamfered edges. Say goodbye to damaged cables and battery straps! And, isn't it just more beautiful to look at?\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe frame comes equipped with all the necessary accessories for analog and HD builds, and hardware with Loctite thread-locking adhesive is provided to increase reliability. The tight structural design minimizes resonance.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX3.5 Review by Wyatt:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/y9x3oSKQZAA\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX3 \u0026amp; VX3.5 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 3.5mm\u003cbr\u003eTop plate thickness: 2mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness: 3.5mm\u003cbr\u003eCNC Side plate thickness: 5mm\u003cbr\u003ePropeller size: 3~3.5 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eVX3 Weight: 68.3g(with TPU parts)\u003cbr\u003eVX3.5 Weight: 70.5g(with TPU parts)\u003cbr\u003eColour: Tropical Mix \u003cbr\u003eVX3 Total Dimensions:118mm*135mm Wheelbase:144mm\u003cbr\u003eVX3.5 Total Dimensions:127.5mm*148mm Wheelbase:160mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/p\u003e\n\u003cp\u003eVX3\/VX3.5 Manual Details \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/VX3-VX3.5_Frame_instructions.pdf\"\u003e\u003cstrong\u003eClick\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommend parts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1404 For 3inch \u003ca href=\"https:\/\/www.flyfish-rc.com\/products\/flash-1404-4500kv-fpv-motor\"\u003e\u003cstrong\u003eClick\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e1804 For 3.5inch\u003ca href=\"https:\/\/www.flyfish-rc.com\/products\/flash-1804-2450kv-3500kv-freestyle-motor\"\u003e\u003cstrong\u003e Click\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/VX3-VX3.5-Product-Detail.jpg?v=1693295852\"\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"VX3 Frame \/ Tropical Mix","offer_id":42262926491828,"sku":"F000546","price":31.9,"currency_code":"USD","in_stock":false},{"title":"VX3 Frame \/ Black","offer_id":43373797146804,"sku":"F001227","price":31.9,"currency_code":"USD","in_stock":true},{"title":"VX3 Frame \/ Yellow","offer_id":43593729409204,"sku":"FF01634","price":31.9,"currency_code":"USD","in_stock":true},{"title":"VX3.5 Frame \/ Tropical Mix","offer_id":42262926524596,"sku":"F000547","price":32.9,"currency_code":"USD","in_stock":false},{"title":"VX3.5 Frame \/ Black","offer_id":43373797179572,"sku":"FF01391","price":32.9,"currency_code":"USD","in_stock":false},{"title":"VX3.5 Frame \/ Yellow","offer_id":43593729441972,"sku":"FF01633","price":32.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Volador-VX3-VX3.5-O3-Freestyle-FPV-Frame-4.jpg?v=1693295510"},{"product_id":"fifty-5-freestyle-fpv-frame-kit","title":"FIFTY5 O3 Freestyle FPV Frame Kit","description":"\u003cp\u003eIntroducing the FlyFishRC FIFTY5 - One of the best 5.5 Inch Freestyle Frames out there!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMade with highest precision, the FlyFishRC FIFTY5 boasts the FlyFishRC signature, high-strength CNC metal camera plates you all know so well already, as well as top-notch T700 carbon fiber plates. The smooth surface and chamfered edges not only add to its durability but also make it a work of art. And once again, as our signature thing, this frame comes complete with all the necessary accessories for your analog and HD builds. Plus, we've included hardware with a bit of Loctite for added reliability, ensuring your setup stays secure. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAt the heart of our design philosophy for the FIFTY5 frame lies the pursuit of lightweight simplicity and durability. While our Volador VX5\/6 is extremely durable and known as a flying tank, it's not synonymous with lightweight or ease of assembly. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSo, we went on to plan our next frame and we wanted something ever so slightly unusual. First thing we thought of was the size, of course. 5 or 6 inch? The 6-inch quad, known for its speed and payload capacity, could feel a bit sluggish and lacked agility. On the other hand, the nimble 5-inch frame was highly agile but somewhat limited in lifting capacity. Well, why not create a 5.5-inch frame that combines the best of both worlds? \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWith the FIFTY5, you get the strength of a 6-inch platform and the agility of a 5-inch, striking the perfect balance. While it was originally designed for 5.5-inch props (and we recommend you to use those), it offers you the flexibility to opt for standard 5-inch props without missing a beat.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFIFTY5 is definitely not the first frame to be able to run 5.5 inch props, however, it is a fantastic frame that's slightly larger than your regular 5, remarkably easy to assemble, and really lightweight, tipping the scales at just 127g with essential TPU components. Say goodbye to the need for lighter batteries when mounting a GoPro; the FIFTY5 handles it effortlessly. Want extended flight times? Simply use a larger battery, and this frame is ready to rise to the occasion. And the best thing, IT RIPS nothing else!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe FlyFishRC FIFTY5 embodies the essence of innovation - where form meets function, and the pursuit of the perfect balance results in a frame that's versatile, agile, and exceptionally easy to use.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh-end T700 carbon fiber\u003cbr data-mce-fragment=\"1\"\u003eWell thought through structure design\u003cbr data-mce-fragment=\"1\"\u003eJust 127.7g with essential TPU parts\u003cbr data-mce-fragment=\"1\"\u003e5mm thick stiff and strong arms\u003cbr data-mce-fragment=\"1\"\u003eCNC aluminum camera plates offering superior protection\u003cbr data-mce-fragment=\"1\"\u003eThe silicone shock-absorbers for the O3 AU to eliminate jello\u003cbr data-mce-fragment=\"1\"\u003eCompatible with both 19\/20mm cameras\u003cbr data-mce-fragment=\"1\"\u003eHigh-quality TPU parts\u003cbr data-mce-fragment=\"1\"\u003eAbility to run both 5 and 5.5 inch props\u003cbr data-mce-fragment=\"1\"\u003eVery good for smooth cinematic flying, fast speed chasing, and freestyle\u003cbr data-mce-fragment=\"1\"\u003eEquipped with all accessories needed for analog and HD builds\u003cbr data-mce-fragment=\"1\"\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eModel: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFIFTY5\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eGeometry: True-X\u003cbr data-mce-fragment=\"1\"\u003eWheelbase:255mm\u003cbr data-mce-fragment=\"1\"\u003eArm thickness: 5mm\u003cbr data-mce-fragment=\"1\"\u003eTop plate thickness: 2mm\u003cbr data-mce-fragment=\"1\"\u003eMiddle plate thickness: 2.5mm\u003cbr data-mce-fragment=\"1\"\u003eBottom plate thickness: 2.5mm\u003cbr data-mce-fragment=\"1\"\u003ePropeller size: 5~5.5 inch\u003cbr data-mce-fragment=\"1\"\u003eCNC plate thickness: 6mm \u003cbr data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003cbr data-mce-fragment=\"1\"\u003eWeight: 127.7g(with TPU parts)\u003cbr data-mce-fragment=\"1\"\u003eTotal Dimensions:180.3mm*180.3*33mm \u003cbr data-mce-fragment=\"1\"\u003eMotor Mounting hole: 16mm*16mm(M3)\u003cbr data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1x Fifty 5 Frame Kit\u003c\/p\u003e\n\u003cp\u003eFIFTY 5 Manual \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FIFTY5_Manual.pdf?v=1698658059\"\u003e\u003cstrong\u003eClick\u003c\/strong\u003e \u003c\/a\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Fifty-5-Freestyle-FPV-Frame-Kit-Detail_9766040f-0487-417c-827c-6792d745ac17.jpg?v=1697769949\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Fifty-5-Freestyle-FPV-Frame-Kit-Detail_9766040f-0487-417c-827c-6792d745ac17.jpg?v=1697769949\"\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Default Title","offer_id":42419270844596,"sku":"F000871","price":52.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Fifty-5-Freestyle-FPV-Frame-Kit-1.jpg?v=1697617330"},{"product_id":"tony-5-sub250-fpv-freestyle-frame","title":"Tony 5 Sub250 FPV Freestyle Frame","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eFlyFishRC is excited to introduce a new addition to the relatively fresh sub-250g 5” freestyle drone category - the FlyFishRC Tony!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn this modern era, where our hobby meets with aircraft weight restrictions, flying drones larger than 3” has become increasingly challenging. However, we all love a rip on a good old 5” drone, don't we? That's why we believed it was the perfect time to create an exceptionally lightweight 5-inch frame with the potential to craft a sub-250g 5” drone. And that's how Tony came to life.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur objectives were clear: create a lightweight frame with excellent flight characteristics and durability. While these aims are relatively straightforward with a standard 5-inch frame, working with a sub-250g 5” frame is an entirely different animal. We won't pretend that this frame was developed without any compromises, but we've given our all to make it a frame you'll eagerly take out to fly day after day!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTony is a straightforward and easy-to-build platform, fully O3-ready, equipped with our signature CNC aluminum camera plates to ensure your valuable camera remains maximally protected during all types of crashes. It's also compatible with analog cameras, VTX, as well as the HDZERO and Walksnail HD systems (Please verify dimensions for compatibility with all VTXs).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe highly recommend using AIO flight controllers to keep the weight as light as possible, although a 20x20 mini stack will also work well.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor instance, to achieve a sub-250g configuration in our test builds, we utilized a 40A AIO FC, CADDX Vista Nebula Pro, 2004 FlyFishRC Flash motors, TBS Crossfire Nano, bi-blade HQ props, GNB HV 380mAh 6S battery, and one battery strap, resulting in an all-up weight of 248.7g.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHowever, if your intention is to use this frame with the DJI O3 system, the all-up weight of such a setup will increase to around 260g, as the O3 is notably heavier than the Vista. In this case, if staying under 250g is crucial, you might contemplate using a 4S version of the same battery or stripping down the O3 to shave off some of the excess weight.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOverall, Tony is an exciting frame that offers an incredibly enjoyable flying experience. It provides a distinct feeling of being nimble yet not overly floaty due to its lightness. Get your own Tony today and share your feedback online; we'd love to hear about your experience!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnyway... \u003cbr data-mce-fragment=\"1\"\u003e- WHAT’S YOUR NAME?!\u003cbr data-mce-fragment=\"1\"\u003e- TONYYYYY!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-rp3Tyk8JBk?si=pzr3E26rGVwcuV4j\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eOnly 57g (w\/TPU)\u003cbr data-mce-fragment=\"1\"\u003eSub250g capable\u003cbr data-mce-fragment=\"1\"\u003eHigh structural strength\u003cbr data-mce-fragment=\"1\"\u003eHigh-end T700 carbon fiber\u003cbr data-mce-fragment=\"1\"\u003eCNC aluminum camera plates\u003cbr data-mce-fragment=\"1\"\u003eSilicone shock-absorbers for O3 AU\u003cbr data-mce-fragment=\"1\"\u003eCompatible with both 19\/20mm cameras\u003cbr data-mce-fragment=\"1\"\u003eCompatible with most VTX\u003cbr data-mce-fragment=\"1\"\u003eCompact body, well suited for freestyle\u003cbr data-mce-fragment=\"1\"\u003eEquipped with all accessories needed for analog and HD builds\u003cbr data-mce-fragment=\"1\"\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eModel:Tony 5\u003cbr data-mce-fragment=\"1\"\u003eGeometry: True-X\u003cbr data-mce-fragment=\"1\"\u003eWheelbase:215mm\u003cbr data-mce-fragment=\"1\"\u003eArm thickness: 4mm\u003cbr data-mce-fragment=\"1\"\u003eTop plate thickness: 2mm\u003cbr data-mce-fragment=\"1\"\u003eMiddle plate thickness: 2mm\u003cbr data-mce-fragment=\"1\"\u003eBottom plate thickness: 2mm\u003cbr data-mce-fragment=\"1\"\u003ePropeller size: 5inch\u003cbr data-mce-fragment=\"1\"\u003eCNC plate thickness: 4mm \u003cbr data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003cbr data-mce-fragment=\"1\"\u003eWeight: 57g(with TPU parts)\u003cbr data-mce-fragment=\"1\"\u003eTotal Dimensions:133.7mm*168*29mm \u003cbr data-mce-fragment=\"1\"\u003eMotor mounting hole:12mm*12mm(M2)\u003cbr data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5.5mm(M3)\u003cbr data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1x Tony 5 Frame Kit\u003c\/p\u003e\n\u003cp\u003eTony 5 Manual\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Tony_5_Manual.pdf?v=1698658069\"\u003e\u003cstrong\u003e Click\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Tony-5-Freestyle-FPV-Frame-Kit-Detail.jpg?v=1698412809\" alt=\"\"\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Default Title","offer_id":42443577327796,"sku":"F000873","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Tony-5-Freestyle-FPV-Frame-Kit-3.jpg?v=1698412833"},{"product_id":"fifty5-sword-2207-bundle-kit","title":"FIFTY5 Sword 2207 Bundle Kit","description":"\u003cp\u003e\u003cstrong\u003eFrame: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eModel: \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eFIFTY5\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eGeometry: True-X\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWheelbase:255mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eArm thickness: 5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eTop plate thickness: 2mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eMiddle plate thickness: 2.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eBottom plate thickness: 2.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003ePropeller size: 5~5.5 inch\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eCNC plate thickness: 6mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eFPV cam spacing: 19mm\/20mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eWeight: 127.7g(with Antenna, Bumper, RX TPU parts)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eTotal Dimensions:180.3mm*180.3*33mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSword 2207: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Model: Sword 2207 Black\u003cbr\u003e- KV: 1850KV \/ 1950KV\/2050KV (select)\u003cbr\u003e- Input Voltage: 6S Lipo\u003cbr\u003e- Configuration: 12N14P\u003cbr\u003e- Shaft diameter: 4mm\u003cbr\u003e- Motor dimensions (Dia *Len): 26.9*32.4mm\u003cbr\u003e- Weight: 34.4g with short wire\u003cbr\u003e- Wire length: 20AWG 150mm\u003cbr\u003e- Mounting pattern: 16*16mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x FIFTY5 Frame+ 4x Sword 2207 Motor\u003c\/p\u003e","brand":"FlyFish RC","offers":[{"title":"1850KV","offer_id":42451387646132,"sku":"F000871+ M000697","price":99.99,"currency_code":"USD","in_stock":true},{"title":"1950KV","offer_id":42451387678900,"sku":"F000871+ M000698","price":99.99,"currency_code":"USD","in_stock":true},{"title":"2050KV","offer_id":42451387711668,"sku":"F000871+ M000699","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FIFTY5-Sword-2207-Combo.jpg?v=1698661062"},{"product_id":"atlas-4-lr-fpv-frame","title":"Atlas 4 LR FPV Frame","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eIntroducing Atlas, our new 4-inch frame. Weighing in at a mere 55g, Atlas emerges as a formidable contender in the realm of sub-250g frames.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAtlas is anything but your typical long-range or endurance frame. While it excels in extending flight times, its true strength lies in versatility. At FlyFishRC, we've thoroughly enjoyed occasional park freestyle sessions with this frame, and it consistently delivers!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWith meticulous design that seamlessly combines light weight and a good level of durability, Atlas is ready to tackle any challenge. Equipped with FlyFishRC's signature CNC aluminum camera plates with silicone shock absorbers and a deadcat-style layout, Atlas not only takes flight; it does so exceptionally well, offering a unique and gratifying flying experience.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAnd as always, something we take great pride in is our open-source 3D prints, which are readily accessible and remixable on our \u003ca href=\"https:\/\/www.thingiverse.com\/flyfishrc\/designs\" target=\"_blank\"\u003e\u003cstrong\u003eThingiverse\u003c\/strong\u003e\u003c\/a\u003e account. Atlas maintains a mere 55g weight with the complete TPU kit, including arm protectors, action camera base mount, VTX+RX antenna mount, mini GPS holder, and even an XT30 mount that enables integration of an XT30 connector right into the frame. However, our commitment to choice doesn't end here. We've carefully considered your preferences, knowing that not everyone desires an integrated connector. If you prefer an alternative route, there's a cutout in the back of the top plate and one in the front, just behind the action camera base. And, of course, you can always run the lead on the side.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAtlas 4 empowers you to establish your own rules. Want a true sub250g quad? 30-40A AIO, DJI O3\/Vista\/WS\/Analog, FlyFishRC 1804 motors and a 380mAh 6S battery will easily get you below the 250g mark. Want something a bit more spicy? Same setup with FlyFishRC 2004 motors and a bigger battery is what you’ll need!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eShare your experiences online, tag us on social media, and let us know what you love or what you'd like to see improved in our products. We promise to treat every piece of feedback with utmost attention.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThank you for choosing FlyFishRC!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eHigh-end T700 carbon fiber\u003cbr data-mce-fragment=\"1\"\u003eSub-250 build capable \u003cbr data-mce-fragment=\"1\"\u003eWell thought through structure design\u003cbr data-mce-fragment=\"1\"\u003eJust 55g with all TPU parts\u003cbr data-mce-fragment=\"1\"\u003eNo props in view\u003cbr data-mce-fragment=\"1\"\u003eCNC aluminum camera plates\u003cbr data-mce-fragment=\"1\"\u003eSilicone shock-absorbers for the O3 AU\u003cbr data-mce-fragment=\"1\"\u003eCompatible with both 19\/20mm cameras\u003cbr data-mce-fragment=\"1\"\u003eHigh-quality TPU parts\u003cbr data-mce-fragment=\"1\"\u003eXT30 can be integrated \u003cbr data-mce-fragment=\"1\"\u003eDedicated small capacitor cutout\u003cbr data-mce-fragment=\"1\"\u003eMade for endurance flights\u003cbr data-mce-fragment=\"1\"\u003eEquipped with all accessories needed for analog and HD builds\u003cbr data-mce-fragment=\"1\"\u003e12.9-grade strength hardware with Loctite pre-applied\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eModel: Atlas 4\u003cbr data-mce-fragment=\"1\"\u003eGeometry: Deadcat\u003cbr data-mce-fragment=\"1\"\u003eWheelbase: 173mm\u003cbr data-mce-fragment=\"1\"\u003eArm thickness: 3.5mm\u003cbr data-mce-fragment=\"1\"\u003eTop plate thickness: 1.5mm\u003cbr data-mce-fragment=\"1\"\u003eMiddle plate thickness: 1.5mm\u003cbr data-mce-fragment=\"1\"\u003eBottom plate thickness: 1.5mm\u003cbr data-mce-fragment=\"1\"\u003ePropeller size: 4inch\u003cbr data-mce-fragment=\"1\"\u003eCNC plate thickness: 4mm \u003cbr data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003cbr data-mce-fragment=\"1\"\u003eWeight: 55.6g(with TPU parts)\u003cbr data-mce-fragment=\"1\"\u003eTotal Dimensions:108mm*139*28mm \u003cbr data-mce-fragment=\"1\"\u003eMotor Mounting holes:9mm*9mm\/12mm*12mm(M2)\u003cbr data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1x Atlas 4 Frame Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended(Not included)\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/products\/flash-1804-2450kv-3500kv-freestyle-motor\" target=\"_blank\"\u003eFlash 1804 Motor\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/hqprop-t4x2-5grey-2cw-2ccw-poly-carbonate\"\u003eHQProp T4x2.5 Props\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/hqprop-t4x2x3-grey-2cw-2ccw-poly-carbonate\"\u003eHQProp T4x2x3\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/products\/dji-o3-air-unit\" target=\"_blank\"\u003eDJI O3 Air Unit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Atals-4-Deadcat-Long-Range-FPV-Frame-Kit-Detail-1.jpg?v=1699868410\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Atals-4-Deadcat-Long-Range-FPV-Frame-Kit-Detail-1.jpg?v=1699868410\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Default Title","offer_id":42463517245620,"sku":"F000872","price":36.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Atals-4-Long-Range-FPV-Frame-Kit-1.jpg?v=1699100658"},{"product_id":"tony5-flash-2004-bundle-kit","title":"TONY5 Flash 2004 HQ T5x3 Bundle Kit","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFrame: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eModel:Tony 5\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGeometry: True-X\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWheelbase:215mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eArm thickness: 4mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTop plate thickness: 2mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMiddle plate thickness: 2mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBottom plate thickness: 2mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePropeller size: 5inch\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC plate thickness: 4mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: 57g(with TPU parts)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTotal Dimensions:133.7mm*168*29mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotor mounting hole:12mm*12mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5.5mm(M3)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSword 2004: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Model: Flash 2004\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- KV: 1800KV\/2900KV (select)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Input Voltage: 4S\/6S Lipo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Configuration: 12N14P\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Motor dimensions (Dia *Len): 16.5*26MM\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Weight: 16.6g (including 150mm wires)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Wire length: 22AWG 150mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Mounting pattern: 12*12mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHQProp T5X3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003ePropeller Diameter: 5 inch       \u003cbr data-mce-fragment=\"1\"\u003ePitch : 3                 \u003cbr data-mce-fragment=\"1\"\u003eBlades : 2\u003cbr data-mce-fragment=\"1\"\u003eMaterial : Poly Carbonate        \u003cbr data-mce-fragment=\"1\"\u003eWeight :2.35g\u003cbr data-mce-fragment=\"1\"\u003eHub Diameter : 9.8mm           \u003cbr data-mce-fragment=\"1\"\u003eHub Thickness:5mm        \u003cbr data-mce-fragment=\"1\"\u003eShaft :1.9\/1.5\/1.9mm \u003cbr data-mce-fragment=\"1\"\u003eAdaptor Rings : NO\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e1x TONY5 Frame\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e4x Flash 2004 Motor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CW HQProp T5X3 propeller\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CCW HQProp T5X3 propeller\u003c\/span\u003e\u003c\/div\u003e","brand":"FlyFishRC","offers":[{"title":"1800KV","offer_id":42497146421428,"sku":"F000873+M000587+PP00751","price":89.99,"currency_code":"USD","in_stock":true},{"title":"2900kv","offer_id":42497146454196,"sku":"F000873+M000588+PP00751","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/TONY5-Flash-2004-HQ-T5-3-Bundle-Kit.jpg?v=1700474540"},{"product_id":"atlas-4-flash-1804-bundle-kit","title":"Atlas 4 Flash 1804 HQ T4x2x3 Bundle Kit","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFrame: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eModel: Atlas 4\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGeometry: Deadcat\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWheelbase: 173mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eArm thickness: 3.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTop plate thickness: 1.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMiddle plate thickness: 1.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBottom plate thickness: 1.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePropeller size: 4inch\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC plate thickness: 4mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: 55.6g(with TPU parts)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTotal Dimensions:108mm*139*28mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotor Mounting holes:9mm*9mm\/12mm*12mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFlash 1804: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Model: Flash 1804\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- KV: 3500KV\/\u003c\/span\u003e\u003cspan\u003e2450KV (select)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Input Voltage: 4S\/6S Lipo\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Configuration: 12N14P\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Motor dimensions (Dia *Len): 16.5*23.8MM\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Weight: 14g with short wire\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Wire length: 22AWG 150mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Mounting pattern: 12*12mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHQProp T4X2X3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePropeller Diameter: 4 inch       \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePitch : 2                \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlades :3\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMaterial : Poly Carbonate        \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight :2g\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHub Diameter : 9.8mm           \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHub Thickness:5mm         \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShaft :1.9\/1.5\/1.9mm \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdaptor Rings : NO\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e1x Atlas 4 Frame\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e4x Flash 1804 Motor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CW HQProp T4X2X3 propeller\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CCW HQProp T4X2X3 propeller\u003c\/span\u003e\u003c\/div\u003e","brand":"FlyFishRC","offers":[{"title":"2450KV","offer_id":42497152155828,"sku":"F000872+M000589+PP00908","price":79.99,"currency_code":"USD","in_stock":true},{"title":"3500KV","offer_id":42497152188596,"sku":"F000872+M000590+PP00908","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/TONY5-Sword-2004-Bundle-Kit.jpg?v=1700474741"},{"product_id":"fifty5-flash-2306-bundle-kit","title":"FIFTY5 Flash 2306 HQ 5.5x3.5x3 Bundle Kit","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFrame: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eModel: \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eFIFTY5\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGeometry: True-X\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWheelbase:255mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eArm thickness: 5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTop plate thickness: 2mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMiddle plate thickness: 2.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBottom plate thickness: 2.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePropeller size: 5~5.5 inch\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC plate thickness: 6mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: 127.7g(with Antenna, Bumper, RX TPU parts)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTotal Dimensions:180.3mm*180.3*33mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFLASH 2306: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Model: Flash 2306\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- KV: 1750KV\/2550KV (select)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Input Voltage: 4S\/6S Lipo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Configuration: 12N14P\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Motor dimensions (Dia *Len): 29.4*31.8MM\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Weight: 32.2g with short wire\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Wire length: 20AWG 150mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Mounting pattern: 16*16mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHQProp 5.5X3.5X3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePropeller Diameter: 5.5 inch       \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePitch : 3.5               \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlades : 3\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMaterial : Poly Carbonate        \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight : 4.6g\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHub Diameter :12.5mm           \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHub Thickness:6.2mm           \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShaft :5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdaptor Rings : NO\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e1x FIFTY5 Frame\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e4x Flash 2306 Motor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CW HQProp 5.5X3.5X3 propeller\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CCW HQProp 5.5X3.5X3 propeller\u003c\/span\u003e\u003c\/div\u003e","brand":"FlyFishRC","offers":[{"title":"1750KV","offer_id":42497189609652,"sku":"F000871+ SKU00127+PP00741","price":119.99,"currency_code":"USD","in_stock":true},{"title":"2550KV","offer_id":42497189642420,"sku":"F000871+SKU00128 +PP00741","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Atals4-Sword-2207-Bundle-Kit.jpg?v=1700474913"},{"product_id":"volador-vx3-vx3-5-o4-pro-freestyle-frame-kit","title":"Volador VX3 VX3.5 O4 Pro Freestyle Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are pleased to announce the birth of our Volador VX3 and VX3.5 inch frames for FPV flying, these frames provide a 5-inch flying experience and are highly compatible and simple in their structural design. Necessary accessories are provided to make assembly easy, convenient, and organized.\u003c\/p\u003e\n\u003cp\u003eThe frame is designed with a Squashed X configuration, allowing for maximum control and compatibility with a range of analog and HD systems available in the market. The high-quality TPU components are cleverly designed to facilitate a more integrated and neat installation, ensuring that even pilots with a degree of OCD will be satisfied with the cleanest possible appearance.\u003c\/p\u003e\n\u003cp\u003eWe have also designed a silicone damping board plugin specifically for the installation of the DJI O4 Air Unit camera. This will eliminate any possible jello in the DVR and is also compatible with cameras in 19mm\/20mm format.\u003c\/p\u003e\n\u003cp\u003eThe frame is made of high-strength CNC aluminum alloy components and the highest quality T700 carbon fiber plates, with a super smooth surface and uniformly chamfered edges. Say goodbye to damaged cables and battery straps! And, isn't it just more beautiful to look at?\u003c\/p\u003e\n\u003cp\u003eThe frame comes equipped with all the necessary accessories for analog and HD builds, and hardware with Loctite thread-locking adhesive is provided to increase reliability. The tight structural design minimizes resonance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX3 \u0026amp; VX3.5 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eArm Thickness: 3.5mm\u003cbr\u003eTop plate thickness: 2mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness: 3.5mm\u003cbr\u003eCNC Side plate thickness: 5mm\u003cbr\u003ePropeller size: 3~3.5 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eVX3 Weight: 68.3g(with TPU parts)\u003cbr\u003eVX3.5 Weight: 70.5g(with TPU parts)\u003cbr\u003eColour: Yellow\/Black\u003cbr\u003eVX3 Total Dimensions:118mm*135mm Wheelbase:144mm\u003cbr\u003eVX3.5 Total Dimensions:127.5mm*148mm Wheelbase:160mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eMotor mounting holes: 9*9mm\/12*12mm(φ2mm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Volador VX3\/VX3.5 Frame Kit\u003c\/p\u003e","brand":"FlyFish RC","offers":[{"title":"VX3 \/ Yellow","offer_id":43878202966196,"sku":"FF02378","price":31.9,"currency_code":"USD","in_stock":true},{"title":"VX3 \/ Black","offer_id":43878202998964,"sku":"FF02385","price":31.9,"currency_code":"USD","in_stock":true},{"title":"VX3.5 \/ Yellow","offer_id":43878203031732,"sku":"FF02379","price":32.9,"currency_code":"USD","in_stock":true},{"title":"VX3.5 \/ Black","offer_id":43878203064500,"sku":"FF02386","price":32.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/1.png?v=1742894485"},{"product_id":"volador-ii-vx5-o4-pro-fpv-freestyle-t700-frame-kit","title":"Volador II VX5 O4 Pro FPV Freestyle T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are pleased to announce the second version of our 5” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003c\/p\u003e\n\u003cp\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003c\/p\u003e\n\u003cp\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003c\/p\u003e\n\u003cp\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O4 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003cbr\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003c\/p\u003e\n\u003cp\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003c\/p\u003e\n\u003cp\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003c\/p\u003e\n\u003cp\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr\u003eHigh-end T700 carbon fiber\u003cbr\u003eTight structure design minimizes resonance\u003cbr\u003eThe new CNC aluminum camera plates effectively protect the camera\u003cbr\u003eThe silicone shock-absorbers for the O4 AU eliminate jello\u003cbr\u003eIntegrated XT60 connector for safety and reliability\u003cbr\u003eHigh-quality TPU parts\u003cbr\u003eInnovative anti-slip battery pads\u003cbr\u003eNew motor wire protection tubes\u003cbr\u003eCompatible with both 19\/20mm cameras\u003cbr\u003eEquipped with all accessories needed for analog and HD builds\u003cbr\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr\u003eHigh electronics compatibility\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr\u003eThe frame is now significantly lighter.\u003cbr\u003eThe new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.\u003cbr\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003cbr\u003eAdded keystone to even further reduce arm vibration.\u003cbr\u003eAdded bottom screw gasket.\u003cbr\u003eAdded motor wire protection tubes.\u003cbr\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003cbr\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003cbr\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003cbr\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003cbr\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003cbr\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX5 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 5~5.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 177.4g(with TPU parts)\u003cbr\u003eColour: Black\/Yellow \u003cbr\u003eTotal Dimensions:177mm*165mm Wheelbase:225mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eMotor mounting holes:16*16mm(φ3mm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Volador II VX5 Frame Kit\u003c\/p\u003e","brand":"FlyFish RC","offers":[{"title":"Black","offer_id":43878203195572,"sku":"FF02381","price":69.9,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":43878203261108,"sku":"FF02374","price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/VX5-Yellow-1.png?v=1742895457"},{"product_id":"volador-ii-vd5-o4-pro-deadcat-fpv-t700-frame-kit","title":"Volador II VD5 O4 Pro Deadcat FPV T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are pleased to announce the second version of our 5” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003c\/p\u003e\n\u003cp\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003c\/p\u003e\n\u003cp\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003c\/p\u003e\n\u003cp\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O4 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003cbr\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003c\/p\u003e\n\u003cp\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003c\/p\u003e\n\u003cp\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003c\/p\u003e\n\u003cp\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr\u003eHigh-end T700 carbon fiber\u003cbr\u003eTight structure design minimizes resonance\u003cbr\u003eThe new CNC aluminum camera plates effectively protect the camera\u003cbr\u003eThe silicone shock-absorbers for the O4 AU eliminate jello\u003cbr\u003eIntegrated XT60 connector for safety and reliability\u003cbr\u003eHigh-quality TPU parts\u003cbr\u003eInnovative anti-slip battery pads\u003cbr\u003eNew motor wire protection tubes\u003cbr\u003eCompatible with both 19\/20mm cameras\u003cbr\u003eEquipped with all accessories needed for analog and HD builds\u003cbr\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr\u003eHigh electronics compatibility\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr\u003eThe frame is now significantly lighter.\u003cbr\u003eThe new CNC side plate is lighter and perfectly fits the DJI O4 AU camera.\u003cbr\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003cbr\u003eAdded keystone to even further reduce arm vibration.\u003cbr\u003eAdded bottom screw gasket.\u003cbr\u003eAdded motor wire protection tubes.\u003cbr\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003cbr\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003cbr\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003cbr\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003cbr\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003cbr\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVD5 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 5~5.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 186.4g(with TPU parts)\u003cbr\u003eColour: Black\/Yellow\u003cbr\u003eTotal Dimensions:190mm*136mm Wheelbase:225mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eMotor mounting holes:16*16mm(φ3mm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Volador II VD5 Frame Kit\u003c\/p\u003e","brand":"FlyFish RC","offers":[{"title":"Black","offer_id":43879046742196,"sku":"FF02383","price":69.9,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":43879046807732,"sku":"FF02376","price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/VD5-Yellow-1_90f09f5e-e703-4688-b583-d6c7f440a2b6.png?v=1769048933"},{"product_id":"volador-ii-vx6-o4-pro-fpv-freestyle-t700-frame-kit","title":"Volador II VX6 O4 Pro FPV Freestyle T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are pleased to announce the second version of our 6” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003c\/p\u003e\n\u003cp\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003c\/p\u003e\n\u003cp\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003c\/p\u003e\n\u003cp\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O4 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003cbr\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003c\/p\u003e\n\u003cp\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003c\/p\u003e\n\u003cp\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003c\/p\u003e\n\u003cp\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr\u003eHigh-end T700 carbon fiber\u003cbr\u003eTight structure design minimizes resonance\u003cbr\u003eThe new CNC aluminum camera plates effectively protect the camera\u003cbr\u003eThe silicone shock-absorbers for the O4 AU eliminate jello\u003cbr\u003eIntegrated XT60 connector for safety and reliability\u003cbr\u003eHigh-quality TPU parts\u003cbr\u003eInnovative anti-slip battery pads\u003cbr\u003eNew motor wire protection tubes\u003cbr\u003eCompatible with both 19\/20mm cameras\u003cbr\u003eEquipped with all accessories needed for analog and HD builds\u003cbr\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr\u003eHigh electronics compatibility\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr\u003eThe frame is now significantly lighter.\u003cbr\u003eThe new CNC side plate is lighter and perfectly fits the DJI O4 AU camera.\u003cbr\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003cbr\u003eAdded keystone to even further reduce arm vibration.\u003cbr\u003eAdded bottom screw gasket.\u003cbr\u003eAdded motor wire protection tubes.\u003cbr\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003cbr\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003cbr\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003cbr\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003cbr\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003cbr\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVX6 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 6~6.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 188.2g(with TPU parts)\u003cbr\u003eColour: Black\/Yellow (Optional)\u003cbr\u003eTotal Dimensions:209mm*159mm Wheelbase:268mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eMotor mounting holes:16*16mm(φ3mm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Volador II VX6 Frame Kit\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":43879047332020,"sku":"FF02382","price":74.9,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":43879047397556,"sku":"FF02375","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/vx6-yellow-1.png?v=1742977841"},{"product_id":"volador-ii-vd6-o4-pro-deadcat-fpv-t700-frame-kit","title":"Volador II VD6 O4 Pro Deadcat FPV T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eVolador II Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are pleased to announce the second version of our 6” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots.\u003c\/p\u003e\n\u003cp\u003eThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.\u003c\/p\u003e\n\u003cp\u003eThe Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.\u003c\/p\u003e\n\u003cp\u003eWe have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O4 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.\u003cbr\u003eThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it?\u003c\/p\u003e\n\u003cp\u003eThe redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.\u003c\/p\u003e\n\u003cp\u003eThe frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.\u003c\/p\u003e\n\u003cp\u003eGreat efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV2 Features:\u003c\/strong\u003e\u003cbr\u003eHigh-end T700 carbon fiber\u003cbr\u003eTight structure design minimizes resonance\u003cbr\u003eThe new CNC aluminum camera plates effectively protect the camera\u003cbr\u003eThe silicone shock-absorbers for the O4 AU eliminate jello\u003cbr\u003eIntegrated XT60 connector for safety and reliability\u003cbr\u003eHigh-quality TPU parts\u003cbr\u003eInnovative anti-slip battery pads\u003cbr\u003eNew motor wire protection tubes\u003cbr\u003eCompatible with both 19\/20mm cameras\u003cbr\u003eEquipped with all accessories needed for analog and HD builds\u003cbr\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr\u003eHigh electronics compatibility\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eV1 to V2 notable differences:\u003c\/strong\u003e\u003cbr\u003eThe frame is now significantly lighter.\u003cbr\u003eThe new CNC side plate is lighter and perfectly fits the DJI O4 AU camera.\u003cbr\u003eThe new battery anti-slip pad is more “sticky” and has better adhesion.\u003cbr\u003eAdded keystone to even further reduce arm vibration.\u003cbr\u003eAdded bottom screw gasket.\u003cbr\u003eAdded motor wire protection tubes.\u003cbr\u003eThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.\u003cbr\u003eThe new TPU arm protectors are now lighter and allow for easier disassembly.\u003cbr\u003eAll models now come with two types of TPU antenna mount (with or without GPS mount).\u003cbr\u003eThe thickness of the bottom and middle plates has been adjusted to 2.5mm.\u003cbr\u003eThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.\u003cbr\u003eXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVD6 Specifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 6mm\u003cbr\u003eTop plate thickness: 2.5mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003eKeystone thickness:5mm\u003cbr\u003eSide plate thickness:2mm\u003cbr\u003eCNC Side plate thickness:5mm\u003cbr\u003ePropeller size: 6~6.1 inch\u003cbr\u003eMaterial: T700 carbon plate\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 200g(with TPU parts)\u003cbr\u003eColour: Black\/Tropical Mix (Optional)\u003cbr\u003eTotal Dimensions:259mm*109mm Wheelbase:260mm\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eMotor mounting holes:16*16mm(φ3mm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Volador II VD6 Frame Kit\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Black","offer_id":43879048118452,"sku":"FF02384","price":74.9,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":43879048183988,"sku":"FF02377","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/vd6-yellow-1.png?v=1742978075"},{"product_id":"fifty5-o4-pro-freestyle-fpv-frame-kit","title":"FIFTY5 O4 Pro Freestyle FPV Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the FlyFishRC FIFTY5 - One of the best 5.5 Inch Freestyle Frames out there!\u003c\/p\u003e\n\u003cp\u003eMade with highest precision, the FlyFishRC FIFTY5 boasts the FlyFishRC signature, high-strength CNC metal camera plates you all know so well already, as well as top-notch T700 carbon fiber plates. The smooth surface and chamfered edges not only add to its durability but also make it a work of art. And once again, as our signature thing, this frame comes complete with all the necessary accessories for your analog and HD builds. Plus, we've included hardware with a bit of Loctite for added reliability, ensuring your setup stays secure.\u003c\/p\u003e\n\u003cp\u003eAt the heart of our design philosophy for the FIFTY5 frame lies the pursuit of lightweight simplicity and durability. While our Volador VX5\/6 is extremely durable and known as a flying tank, it's not synonymous with lightweight or ease of assembly.\u003c\/p\u003e\n\u003cp\u003eSo, we went on to plan our next frame and we wanted something ever so slightly unusual. First thing we thought of was the size, of course. 5 or 6 inch? The 6-inch quad, known for its speed and payload capacity, could feel a bit sluggish and lacked agility. On the other hand, the nimble 5-inch frame was highly agile but somewhat limited in lifting capacity. Well, why not create a 5.5-inch frame that combines the best of both worlds?\u003c\/p\u003e\n\u003cp\u003eWith the FIFTY5, you get the strength of a 6-inch platform and the agility of a 5-inch, striking the perfect balance. While it was originally designed for 5.5-inch props (and we recommend you to use those), it offers you the flexibility to opt for standard 5-inch props without missing a beat.\u003c\/p\u003e\n\u003cp\u003eFIFTY5 is definitely not the first frame to be able to run 5.5 inch props, however, it is a fantastic frame that's slightly larger than your regular 5, remarkably easy to assemble, and really lightweight, tipping the scales at just 127g with essential TPU components. Say goodbye to the need for lighter batteries when mounting a GoPro; the FIFTY5 handles it effortlessly. Want extended flight times? Simply use a larger battery, and this frame is ready to rise to the occasion. And the best thing, IT RIPS nothing else!\u003c\/p\u003e\n\u003cp\u003eThe FlyFishRC FIFTY5 embodies the essence of innovation - where form meets function, and the pursuit of the perfect balance results in a frame that's versatile, agile, and exceptionally easy to use.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh-end T700 carbon fiber\u003cbr\u003eWell thought through structure design\u003cbr\u003eJust 127.7g with essential TPU parts\u003cbr\u003e5mm thick stiff and strong arms\u003cbr\u003eCNC aluminum camera plates offering superior protection\u003cbr\u003eThe silicone shock-absorbers for the O4 AU to eliminate jello\u003cbr\u003eCompatible with both 19\/20mm cameras\u003cbr\u003eHigh-quality TPU parts\u003cbr\u003eAbility to run both 5 and 5.5 inch props\u003cbr\u003eVery good for smooth cinematic flying, fast speed chasing, and freestyle\u003cbr\u003eEquipped with all accessories needed for analog and HD builds\u003cbr\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eModel: FIFTY5\u003cbr\u003eGeometry: True-X\u003cbr\u003eWheelbase:255mm\u003cbr\u003eArm thickness: 5mm\u003cbr\u003eTop plate thickness: 2mm\u003cbr\u003eMiddle plate thickness: 2.5mm\u003cbr\u003eBottom plate thickness: 2.5mm\u003cbr\u003ePropeller size: 5~5.5 inch\u003cbr\u003eCNC plate thickness: 6mm\u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 127.7g(with TPU parts)\u003cbr\u003eTotal Dimensions:180.3mm*180.3*33mm\u003cbr\u003eMotor Mounting hole: 16mm*16mm(M3)\u003cbr\u003eStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Fifty 5 Frame Kit\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Default Title","offer_id":43879048315060,"sku":"FF02387","price":52.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/fifty5-1.png?v=1742978290"},{"product_id":"atlas-4-o4-pro-lr-fpv-frame","title":"Atlas 4 O4 Pro LR FPV Frame","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eIntroducing Atlas, our new 4-inch frame. Weighing in at a mere 55g, Atlas emerges as a formidable contender in the realm of sub-250g frames.\u003cbr\u003e\u003cbr\u003eAtlas is anything but your typical long-range or endurance frame. While it excels in extending flight times, its true strength lies in versatility. At FlyFishRC, we've thoroughly enjoyed occasional park freestyle sessions with this frame, and it consistently delivers!\u003cbr\u003e\u003cbr\u003eWith meticulous design that seamlessly combines light weight and a good level of durability, Atlas is ready to tackle any challenge. Equipped with FlyFishRC's signature CNC aluminum camera plates with silicone shock absorbers and a deadcat-style layout, Atlas not only takes flight; it does so exceptionally well, offering a unique and gratifying flying experience.\u003cbr\u003e\u003cbr\u003eAnd as always, something we take great pride in is our open-source 3D prints, which are readily accessible and remixable on our \u003ca href=\"https:\/\/www.thingiverse.com\/flyfishrc\/designs\" target=\"_blank\"\u003e\u003cstrong\u003eThingiverse\u003c\/strong\u003e\u003c\/a\u003e account. Atlas maintains a mere 55g weight with the complete TPU kit, including arm protectors, action camera base mount, VTX+RX antenna mount, mini GPS holder, and even an XT30 mount that enables integration of an XT30 connector right into the frame. However, our commitment to choice doesn't end here. We've carefully considered your preferences, knowing that not everyone desires an integrated connector. If you prefer an alternative route, there's a cutout in the back of the top plate and one in the front, just behind the action camera base. And, of course, you can always run the lead on the side.\u003cbr\u003e\u003cbr\u003eAtlas 4 empowers you to establish your own rules. Want a true sub250g quad? 30-40A AIO, DJI O4 Pro\/Vista\/WS\/Analog, FlyFishRC 1804 motors and a 380mAh 6S battery will easily get you below the 250g mark. Want something a bit more spicy? Same setup with FlyFishRC 2004 motors and a bigger battery is what you’ll need!\u003cbr\u003e\u003cbr\u003eShare your experiences online, tag us on social media, and let us know what you love or what you'd like to see improved in our products. We promise to treat every piece of feedback with utmost attention.\u003cbr\u003e\u003cbr\u003eThank you for choosing FlyFishRC!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh-end T700 carbon fiber\u003cbr\u003eSub-250 build capable \u003cbr\u003eWell thought through structure design\u003cbr\u003eJust 55g with all TPU parts\u003cbr\u003eNo props in view\u003cbr\u003eCNC aluminum camera plates\u003cbr\u003eSilicone shock-absorbers for the O4 AU\u003cbr\u003eCompatible with both 19\/20mm cameras\u003cbr\u003eHigh-quality TPU parts\u003cbr\u003eXT30 can be integrated \u003cbr\u003eDedicated small capacitor cutout\u003cbr\u003eMade for endurance flights\u003cbr\u003eEquipped with all accessories needed for analog and HD builds\u003cbr\u003e12.9-grade strength hardware with Loctite pre-applied\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eModel: Atlas 4\u003cbr\u003eGeometry: Deadcat\u003cbr\u003eWheelbase: 173mm\u003cbr\u003eArm thickness: 3.5mm\u003cbr\u003eTop plate thickness: 1.5mm\u003cbr\u003eMiddle plate thickness: 1.5mm\u003cbr\u003eBottom plate thickness: 1.5mm\u003cbr\u003ePropeller size: 4inch\u003cbr\u003eCNC plate thickness: 4mm \u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 55.6g(with TPU parts)\u003cbr\u003eTotal Dimensions:108mm*139*28mm \u003cbr\u003eMotor Mounting holes:9mm*9mm\/12mm*12mm(M2)\u003cbr\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eMotor mounting holes: 9*9mm\/12*12mm(φ2mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Atlas 4 Frame Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended(Not included)\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/products\/flash-1804-2450kv-3500kv-freestyle-motor\" target=\"_blank\"\u003eFlash 1804 Motor\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/hqprop-t4x2-5grey-2cw-2ccw-poly-carbonate\"\u003eHQProp T4x2.5 Props\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.flyfish-rc.com\/collections\/new-arrival\/products\/hqprop-t4x2x3-grey-2cw-2ccw-poly-carbonate\"\u003eHQProp T4x2x3\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Atlas_4_O4_EN.webp?v=1762827795\" alt=\"\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Default Title","offer_id":44084603060404,"sku":"FF02885","price":36.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/1_8ee6f6ad-d72a-438b-a886-81ba7f9623d5.png?v=1762827930"},{"product_id":"tony-5-o4-pro-sub250-fpv-freestyle-frame","title":"Tony 5 O4 Pro Sub250 FPV Freestyle Frame","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eFlyFishRC is excited to introduce a new addition to the relatively fresh sub-250g 5” freestyle drone category - the FlyFishRC Tony!\u003cbr\u003e\u003cbr\u003eIn this modern era, where our hobby meets with aircraft weight restrictions, flying drones larger than 3” has become increasingly challenging. However, we all love a rip on a good old 5” drone, don't we? That's why we believed it was the perfect time to create an exceptionally lightweight 5-inch frame with the potential to craft a sub-250g 5” drone. And that's how Tony came to life.\u003cbr\u003e\u003cbr\u003eOur objectives were clear: create a lightweight frame with excellent flight characteristics and durability. While these aims are relatively straightforward with a standard 5-inch frame, working with a sub-250g 5” frame is an entirely different animal. We won't pretend that this frame was developed without any compromises, but we've given our all to make it a frame you'll eagerly take out to fly day after day!\u003cbr\u003e\u003cbr\u003eTony is a straightforward and easy-to-build platform, fully O4-ready, equipped with our signature CNC aluminum camera plates to ensure your valuable camera remains maximally protected during all types of crashes. It's also compatible with analog cameras, VTX, as well as the HDZERO and Walksnail HD systems (Please verify dimensions for compatibility with all VTXs).\u003cbr\u003e\u003cbr\u003eWe highly recommend using AIO flight controllers to keep the weight as light as possible, although a 20x20 mini stack will also work well.\u003cbr\u003e\u003cbr\u003eFor instance, to achieve a sub-250g configuration in our test builds, we utilized a 40A AIO FC, CADDX Vista Nebula Pro, 2004 FlyFishRC Flash motors, TBS Crossfire Nano, bi-blade HQ props, GNB HV 380mAh 6S battery, and one battery strap, resulting in an all-up weight of 248.7g.\u003cbr\u003e\u003cbr\u003eHowever, if your intention is to use this frame with the DJI O4 system, the all-up weight of such a setup will increase to around 260g, as the O4 is notably heavier than the Vista. In this case, if staying under 250g is crucial, you might contemplate using a 4S version of the same battery or stripping down the O4 to shave off some of the excess weight.\u003cbr\u003e\u003cbr\u003eOverall, Tony is an exciting frame that offers an incredibly enjoyable flying experience. It provides a distinct feeling of being nimble yet not overly floaty due to its lightness. Get your own Tony today and share your feedback online; we'd love to hear about your experience!\u003cbr\u003e\u003cbr\u003eAnyway... \u003cbr\u003e- WHAT’S YOUR NAME?!\u003cbr\u003e- TONYYYYY!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-rp3Tyk8JBk?si=pzr3E26rGVwcuV4j\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eOnly 57g (w\/TPU)\u003cbr\u003eSub250g capable\u003cbr\u003eHigh structural strength\u003cbr\u003eHigh-end T700 carbon fiber\u003cbr\u003eCNC aluminum camera plates\u003cbr\u003eSilicone shock-absorbers for O4 AU\u003cbr\u003eCompatible with both 19\/20mm cameras\u003cbr\u003eCompatible with most VTX\u003cbr\u003eCompact body, well suited for freestyle\u003cbr\u003eEquipped with all accessories needed for analog and HD builds\u003cbr\u003e12.9-grade strength hardware with Loctite threadlocker pre-applied\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eModel:Tony 5\u003cbr\u003eGeometry: True-X\u003cbr\u003eWheelbase:215mm\u003cbr\u003eArm thickness: 4mm\u003cbr\u003eTop plate thickness: 2mm\u003cbr\u003eMiddle plate thickness: 2mm\u003cbr\u003eBottom plate thickness: 2mm\u003cbr\u003ePropeller size: 5inch\u003cbr\u003eCNC plate thickness: 4mm \u003cbr\u003eFPV cam spacing: 19mm\/20mm\u003cbr\u003eWeight: 57g(with TPU parts)\u003cbr\u003eTotal Dimensions:133.7mm*168*29mm \u003cbr\u003eMotor mounting hole:12mm*12mm(M2)\u003cbr\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5.5mm(M3)\u003cbr\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003cbr\u003eMotor mounting holes:12*12mm(φ2mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Tony 5 Frame Kit\u003c\/p\u003e\n\u003cp\u003eTony 5 Manual\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Tony_5_Manual.pdf?v=1698658069\"\u003e\u003cstrong\u003e Click\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Tony_5_O4_EN.webp?v=1762828252\" alt=\"\"\u003e\u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Default Title","offer_id":44084606697652,"sku":"FF02884","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/FlyFishRC-Tony-5-Freestyle-FPV-Frame-Kit-3.jpg?v=1698412833"},{"product_id":"atlas-4-o4-pro-frame-flash-1804-motor-hq-t4x2x3-propeller-bundle-kit","title":"Atlas 4 O4 Pro Frame Flash 1804 Motor HQ T4x2x3 Propeller Bundle Kit","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFrame: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eModel: Atlas 4 O4 Pro Frame \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGeometry: Deadcat\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWheelbase: 173mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eArm thickness: 3.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTop plate thickness: 1.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMiddle plate thickness: 1.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBottom plate thickness: 1.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePropeller size: 4inch\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC plate thickness: 4mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFPV cam spacing: 19mm\/20mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: 55.6g(with TPU parts)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTotal Dimensions:108mm*139*28mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotor Mounting holes:9mm*9mm\/12mm*12mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStack mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFlash 1804: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Model: Flash 1804\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- KV: 3500KV\/\u003c\/span\u003e\u003cspan\u003e2450KV (select)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Input Voltage: 4S\/6S Lipo\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Configuration: 12N14P\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Motor dimensions (Dia *Len): 16.5*23.8MM\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Weight: 14g with short wire\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Wire length: 22AWG 150mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Mounting pattern: 12*12mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHQProp T4X2X3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePropeller Diameter: 4 inch       \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePitch : 2                \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlades :3\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMaterial : Poly Carbonate        \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight :2g\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHub Diameter : 9.8mm           \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHub Thickness:5mm         \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShaft :1.9\/1.5\/1.9mm \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdaptor Rings : NO\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e1x Atlas 4 O4 Pro Frame\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e4x Flash 1804 Motor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CW HQProp T4X2X3 propeller\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e2 x CCW HQProp T4X2X3 propeller\u003c\/span\u003e\u003c\/div\u003e","brand":"FlyFishRC","offers":[{"title":"2450KV","offer_id":44087647305908,"sku":"FF02885+M000589+PP00908","price":79.99,"currency_code":"USD","in_stock":true},{"title":"3500KV","offer_id":44087647338676,"sku":"FF02885+M000590+PP00908","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/TONY5-Sword-2004-Bundle-Kit.jpg?v=1700474741"},{"product_id":"volador-vd4-o4-pro-deadcat-fpv-t700-frame-kit","title":"Volador VD4 O4 Pro Deadcat FPV T700 Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe all-new Flying Fish Volador VD4, weighing 127g, features a DC layout, providing unobstructed flight view without propellers in view. The newly designed CNC side plates paired with a silicone-damped camera mount perfectly match the O4 VTX, completely eliminating jello effect and delivering a smooth FPV experience.\u003c\/p\u003e\n\u003cp\u003eKey Highlights\u003cbr\u003eStrong, Light, Stable, Simple Assembly\u003cbr\u003eThe main structure combines T700 carbon fiber with high-strength CNC aluminum alloy. Each edge is precision chamfered, achieving slight weight reduction while protecting cables for a premium, integrated finish. Innovative locking mechanisms physically suppress frame resonance, complemented by custom high-quality TPU components for more robustness and stability.\u003c\/p\u003e\n\u003cp\u003eVersatile Compatibility, Efficient Damping\u003cbr\u003eDual mounting positions for the stack, VTX, and motors provide more flexibility, easily accommodating various ESCs, FCs and most analog and HD VTX systems on the market. Includes all necessary accessories for both analog and HD builds. Specially designed silicone damping pads for the VTX camera effectively eliminate DVR jello effect. \u003c\/p\u003e\n\u003cp\u003eGet yours now and explore with FlyFishRC!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eArm Thickness: 4mm\u003cbr\u003eTop Plate Thickness: 2mm\u003cbr\u003eMiddle Plate Thickness: 2.5mm\u003cbr\u003eBottom Plate Thickness: 2.5mm\u003cbr\u003eBrace Thickness: 4mm\u003cbr\u003eCNC Side Plate Thickness: 5mm\u003cbr\u003ePropeller Size: 4 inch\u003cbr\u003eMaterial: T700 Carbon Fiber\u003cbr\u003eFPV Camera Spacing: 19mm\/20mm\u003cbr\u003eWeight: Approx. 127g (including printed parts)\u003cbr\u003eColor: Black\/Yellow\u003cbr\u003eFrame Dimensions: 195*155*33mm\u003cbr\u003eWheelbase: 183mm\u003cbr\u003eFlight Stack Mounting Holes: 20*20mm (M3) \/ 30.5*30.5mm (M3)\u003cbr\u003eFlight Stack Mounting Height: 22mm\u003cbr\u003eVTX Mounting Holes: 20*20mm (M2) \/ 25.5*25.5mm (M2)\u003cbr\u003eMotor Mounting Holes: 12*12mm (φ2mm) \/ 16×16mm (φ3mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Volador VD4 O4 Pro Frame Kit\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/Volador_VD4_O4_EN_67518e04-8465-47bf-8d50-74db5dbffb16.webp?v=1769494570\" alt=\"\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FlyFishRC","offers":[{"title":"Yellow","offer_id":44118941663412,"sku":"FF03846","price":49.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44118941696180,"sku":"FF03754","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/1811\/0132\/files\/vd4-yellow-1.png?v=1769494703"}],"url":"https:\/\/www.flyfish-rc.com\/collections\/frames-1.oembed","provider":"FlyFish RC","version":"1.0","type":"link"}